Authentic Cisco Certification Exam 350-601 Questions Answers

The FCoE uplink port type is designed to carry Fibre Channel over Ethernet traffic, which is typically used for storage server communication. Configuring port E1/31-32 as FCoE uplinks will ensure that only storage server traffic for VLAN 200 is forwarded, aligning with the requirement to dedicate these ports solely for storage traffic

POAP is an automatic provisioning and zero-touch deployment feature that assists device owners in the

initial deployment and configuration of Nexus switches.

The feature works by checking for a local configuration script. If the script has been deleted, the switch has

been reset to factory settings, or this is the first boot-up, the POAP daemon will connect to a preset list of

servers to download an initial configuration file.

To perform this operation, the switch must first obtain an IP address from a local DHCP server. POAP

configuration settings can also be passed through the DHCP response.

Which conditions should be verified, so they need to be TRUE. Like no startup (A) and bootup (B). C means

that it needs to miss a license file and E means it needs to miss an NX-OS image.

The ‘protect’ violation mode in port security is designed to drop packets with unknown source MAC addresses without affecting the interface’s state. This mode ensures that traffic from already learned MAC addresses continues to be forwarded while preventing any new MAC addresses from forwarding traffic until a sufficient number of secure MAC addresses are removed or the maximum count is increased. This configuration aligns with the requirement to not affect already learned MAC addresses.

References := For further reading and detailed understanding, refer to the Cisco Data Center Core Technologies study guide and source documents available on the Cisco Learning Network Store and Cisco’s official solutions page for data center virtualization.