Authentic Netapp Certification Exam NS0-522 Questions Answers

To clone a LUN from a SnapMirror destination volume for testing purposes, the volume clone create command should be used. This command creates a FlexClone volume from the SnapMirror destination, making the LUN within it accessible for testing without disrupting the original volume.

For more details, refer to:

NetApp Documentation on Volume Clone Create

NetApp Community Discussion on LUN Cloning

ONTAP manages the MTU consistently across ports belonging to the same broadcast domain. To transition the storage network from the standard 1500-byte MTU to jumbo frames, the administrator modifies the MTU of the appropriate broadcast domain. The applicable operation is network port broadcast-domain modify, represented by broadcast-domain modify in the answer choices. NetApp documents 9000 bytes as a typical jumbo-frame MTU and notes that changing a broadcast-domain MTU changes the MTU for all ports contained in that domain. The surrounding Ethernet path—including host NICs and switch interfaces—must also support the configured MTU end to end. Changing an individual LIF, subnet, or unrelated port property does not provide the correct broadcast-domain-wide MTU configuration. Therefore, option C is the correct ONTAP configuration operation.

For a NetApp AFF All SAN Array (ASA) A800 MetroCluster IP configuration with 72 disks per site and Cisco N9K-C9336C-FX2 backend switches, the minimum number of rack units required on each site is 16 RU. This includes space for the controllers, disk shelves, and the necessary network switches. This configuration ensures that all components are properly accommodated and operational within the specified rack space.

For detailed information on the rack unit requirements and MetroCluster IP configurations, refer to:

NetApp Documentation on MetroCluster IP

MetroCluster IP Solution Architecture