Which two statements are false about backup to ZFS Storage Appliance (ZFSSA)?
Options:
A.
ZFSSA may connect directly to the Exadata 100Gb RoCE network switches.
B.
Top of Rack (ToR) switches are managed as part of the hardware stack and software levels are upgraded during the patching process.
C.
When backing up multi-rack systems, sharing Exadata X9M switches is recommended.
D.
ZFS Snapshots can provide rapid cloning of development and test environment.
Answer:
A, C
Explanation:
Explanation:
A. ZFS Storage Appliance (ZFSSA) can't connect directly to the Exadata 100Gb RoCE network switches. ZFSSA uses Fibre Channel protocol to connect to the Exadata storage cells. C. When backing up multi-rack systems, sharing Exadata X9M switches is not recommended. Each rack should have its own switches to minimize the risk of data loss due to switch failure.
Review the safety guidelines.
Unpack Oracle Exadata Rack.
Let the Exadata acclimatize for 24 hours.
Place Exadata in its allocated space.
Stabilize the Exadata Rack.
Power on Exadata PDU A.
Power on Exadata PDU B.
This order ensures that the necessary safety precautions are taken before installing the Exadata Database Machine, and that the machine is allowed to acclimate to its new environment before being powered on.
Question 9
Which of the following is NOT a requirement when validating, receiving, unpacking, and planning access route and space requirements for Exadata Database Machine?
Options:
A.
The entire access route to the installation site should be free of raised-pattern flooring that can cause vibration.
B.
914mm of space required above the rack height is required for maintenance access.
C.
The incline of any access route ramp must be less than or equal to 6 degrees.
D.
All four leveling and stabilizing feet should be raised and out of the way prior to moving the rack.
E.
Oracle Exadata Rack may only be installed on raised floor environments.
F.
A conditioned space is required to remove the packaging material to reduce particles before entering the data center.
Answer:
E
Explanation:
Explanation:
Exadata Database Machine is a pre-configured and pre-tuned hardware and software system designed to run Oracle Database, it can be installed on raised floor environments, but also on concrete or tile floors
Oracle Exadata Database Machine X9M Implementation Essentials states that Exadata racks are designed to be installed on flat surfaces, not raised floor environments. It is not required to install the rack on raised floor environments. Additionally, the other options listed are all requirements for validating, receiving, unpacking, and planning access route and space requirements for Exadata Database Machine. (Source: Oracle Exadata Database Machine X9M Implementation Essentials, page 41)