HQT-4180 Exam Dumps - Hitachi Vantara Qualified Professional Questions and Answers

Both servers must be registered in two different Host Groups.

Port security must be enabled on both ports.

The Universal Volume Manager license must be installed.

Two cache partitions must be created on the VSP for the servers.

Check if the status of the PS is blocked, and if yes, then replace it directly.

Use the Maintenance Utility for blocking the PS, then replace it.

Use the Maintenance Utility for blocking the controller, then replace the PS.

Use the MPC for blocking the PS, then replace it.

adding a DKB

adding a DB60 drive tray

upgrading from G200 to G800

upgrading from G200 to G600

Two additional Disk Boards (DKBs) have to be installed.

Slots B of both controllers must be available for DKB installation.

The SAS Expansion license has to be installed.

In Shared Memory, the Extension1 has to be enabled.

Drive Boxes (DBs) with SAS interface have to be added.

MPC

Webconsole

GUM

BECK

The SVP drive is formatted.

The MPC software is updated.

All the data on RAID groups is lost.

The license keys are deleted.

IP addresses of maintenance ports

IP addresses of management ports

IP addresses of all the ports

IP addresses of all the ports and of the SVP

Parity groups must be deleted.

The RAID level must be changed in Storage Navigator.

The RAID level in the SVP Maintenance window must be changed.

The RAID 5 group must be put into DRU mode in Storage Navigator.

two BM35 per controller

two BM45 per controller

one BM45 per controller

two BM35 per system

The RAID level must be changed in Storage Navigator.

The RAID level must be changed in the SVP Maintenance window.

The RAID 5 Group must be put into DRU mode in Storage Navigator.

The RAID Group must be deleted.