2V0-17.25 Exam Dumps - VMware VCP-VCF Administrator Questions and Answers

The VCF 9.0 Operations Guide – Views and Reports explains the four types of views available for custom dashboards:

Object Relationship View: Displays dependencies and hierarchy between objects (for example, VMs, hosts, datastores) but does not provide exportable tabular data.

Scoreboard View: Provides a high-level KPI visualization of a few key objects but is not intended for large tabular exports.

List View (Correct): Displays tabular data across many objects, such as CPU, memory, and disk metrics for VMs. The guide states: “List views are useful when you want to compare metrics across multiple objects and can be exported to CSV for further analysis.”

Trend View: Focuses on historical data and growth over time, but export to CSV is not its primary purpose.

Because the security team requires both tabular comparison of VM resource usage and the ability to export the data to CSV, the List View is the only option that meets both requirements.

To calculate the elapsed time correctly, we must identify the specific start and end points defined in the VMware operations lifecycle.

Default Collection Interval: VCF Operations collects data every 5 minutes.

Symptom Triggering (The Start Point): A symptom does not " trigger " the moment a threshold is breached. Instead, it triggers only after the Wait Cycle is completed. With a Wait Cycle of 2, the symptom triggers at the 10-minute mark ($2 \times 5\text{ minutes}$). This is the " Triggering " event referred to in the question.

Alert Cancellation (The End Point): For an alert to cancel automatically, the condition must remain " False " for the duration of the Cancel Cycle. With a Cancel Cycle of 2, this requires an additional 10 minutes ($2 \times 5\text{ minutes}$) after the condition has cleared.

The Timeline Breakdown:

T+0 to T+10: Wait Cycles are occurring (Alert is not yet triggered).

T+10: Symptom Triggers (Event A).

T+10 to T+20: Cancel Cycles are occurring (Assuming the condition became false immediately at T+10).

T+20: Alert Automatically Cancels (Event B).

The time elapsed between Event A (Trigger) and Event B (Cancel) is exactly 10 minutes.

Resetting identity management in VCF requires removal of existing identity configurations, including external identity providers and the Identity Broker configuration. The VCF documentation states that to reset identity services, administrators must remove the SSO configuration, including broker settings, and then reconfigure SSO.

Option B ensures complete cleanup of identity integrations.

Option C re-establishes identity management with the correct configuration.

Disabling (D) or reverting (E) is not a supported reset method. Leaving provisioned users/groups (A) would not fully reset identity management.

In VMware Cloud Foundation 9.0, certificate replacement procedures for components such as:

vCenter Server

NSX Manager

SDDC Manager

Aria Suite components

require certificates to be provided in PEM format.

From the VCF 9.0 documentation under Certificate Management:

“When replacing certificates with CA-signed certificates, provide the certificate and private key in PEM format.”

Additionally:

“The certificate file must include the full chain (server certificate and intermediate certificates) in PEM encoding.”

Why PEM?

PEM format:

Base64 encoded

Human-readable

Common format for VMware components

Required for SDDC Manager certificate import workflows

Why the Other Options Are Incorrect

A. PFX (PKCS#12)Contains private key and certificate bundled together; not the required format for VCF certificate replacement workflows.

B. DERBinary format; VMware Cloud Foundation certificate workflows require Base64 PEM format.

D. P7B (PKCS#7)Does not contain private key; unsuitable for certificate replacement.

Document References (VCF 9.0)

VMware Cloud Foundation 9.0 → Security and Certificate Management

VMware Cloud Foundation 9.0 → Replace Certificates with CA-Signed Certificates

VMware Cloud Foundation 9.0 → Certificate Requirements and Formats

The vSAN ESA documentation in VCF 9.0 explains that auto-policy management dynamically selects the most efficient data placement policy based on cluster size. For RAID-6 (erasure coding with double parity), the minimum required host count is 6. The docs state:

“RAID-6 (Erasure Coding with FTT=2) requires a minimum of six hosts in a vSAN ESA cluster. This ensures that data and parity components can be distributed across unique failure domains.”

With fewer than six hosts, RAID-6 cannot be enforced and auto-policy management will fall back to RAID-1 mirroring. RAID-6 in vSAN ESA provides higher storage efficiency but comes with stricter host count requirements. Options 2 and 4 are far below requirements, while 8 provides more redundancy but is not the minimum. Therefore, the correct minimum number of hosts for RAID-6 with ESA is 6.

To deploy Kubernetes workloads through VCF Automation (Organization for All Applications), the following prerequisites are required:

vSphere Supervisor must be activated within the workload domain (B) to enable Kubernetes functionality.

A Region must be configured (A) to provide compute and storage capacity to the Organization.

NSX Federation (C) is optional and not required.

VKS activation in the Management domain (D, E) is not required for workload domain Kubernetes deployments.

VCF 9.0 states for the Simple Automation model: “Single node… Applies to Small… Can be scaled out to the high availability model by resizing the node to Medium or Large, which also forces the scale out to 3 nodes.” In addition, the Day-N procedure confirms the action is a Scale (scale-out) operation: “Scale VCF Automation… choose a larger target deployment type such as Medium or Large…” and provide “Additional VIPs” and a “Cluster Node IP Pool” (Medium requires a minimum of four IPs), then submit the scale out request. Therefore, moving from Small (Simple) to Medium necessarily transitions to the High Availability (3-node) model rather than remaining a single medium node. This aligns the form factor with the documented model behavior and the fleet management workflow.

===========

In VMware Cloud Foundation 9.0, the construct of VM Applications Organizations was deprecated in favor of All Applications Organizations. The documentation highlights this change:

“Organizations for All Applications provide a unified model for managing both VM and Kubernetes workloads. They support third-party integrations such as Tanzu Salt and Active Directory, and enable deployments to Native Public Cloud endpoints.”

Since the customer upgraded from VCF 5.2, their first new Organization after the upgrade must use the All Applications model. VM Applications Organizations (Option A) are legacy and do not support the full feature set such as NPC or third-party integrations. Option C is incorrect because the Fleet Management API is for monitoring and operational insights, not for creating Organizations.

Therefore, the administrator must create the new Organization as an All Applications Organization in the VCF Automation Provider Management Portal.

VCF Automation event subscriptions support Boolean conditions that determine whether the associated workflow runs. VCF 9.0 states that filters can be applied to subscriptions so that “the event and workflow only triggers if the Boolean expression is ‘true’.” Conditions can access event payload values through event.data, and the != operator is explicitly supported.

Because the stated requirement is specifically to create DNS records only when domainName has been provided, the subscription must test the corresponding custom property:

event.data.customProperties[ ' domainName ' ] != null

Option C checks hostname, which does not satisfy the stated condition. Option B addresses execution ordering: blocking subscriptions prevent another matching subscription from receiving the event until the current runnable item finishes. Option A is relevant to cleanup if the primary workflow fails because VCF supports recovery runnable items for blocking subscriptions, but it does not determine whether the DNS workflow should run based on the presence of the domain name.

The VCF 9.0 Operations Documentation identifies Operations for Networks as the key enabler for the Network Operations feature:

“VCF Operations for Networks (formerly vRNI) provides visibility into network traffic flows, NSX fabric health, application dependency mapping, and micro-segmentation planning. It integrates directly into VCF Operations dashboards under Network Operations.”

The vDefend firewall is unrelated, as it provides workload-level security. The VCF Operations Collector is required for telemetry ingestion but does not provide full Network Operations. NSX itself provides the underlying virtual networking, but it must be monitored through VCF Operations for Networks. Therefore, the correct answer is VCF Operations for Networks.