H12-811_V1.0 Exam Dumps - Huawei HCIA-Datacom Questions and Answers

Main Functions of Routers:Routers primarily operate at the Network Layer (Layer 3) of the OSI model, forwarding data packets based on destination IP addresses and maintaining routing tables for decision-making.

Analysis of Options:

Option A: " Routers forward data packets based on source IP addresses " is incorrect, as routers use the destination IP address in a packet to determine its forwarding path, not the source IP address​​.

Option B: " Routers enable devices on the same network segment to communicate with each other " is not a function of routers. Devices on the same segment communicate using switches or hubs, which operate at the Data Link Layer (Layer 2)​​.

Option C: " Routers forward data packets according to routing tables " is a correct function, as routers rely on routing tables to determine the best path for forwarding packets.

Option D: " Routers learn routes through multiple routing protocols and add them to the routing table " is a correct function of routers in dynamic routing scenarios​.

Correct Answer:The functions A and B are not main functions of routers.

Comprehensive and Detailed Explanation:

Link Aggregation (LACP - IEEE 802.3ad):

Combines multiple physical links into a single logical link.

Provides load balancing and redundancy in case a link fails.

Stacking Technology:

Multiple switches are combined into a single logical unit, improving redundancy and simplifying management.

If one switch in the stack fails, others continue functioning without disrupting the network.

Both technologies significantly enhance network reliability, especially in campus networks, ensuring minimal downtime and higher availability.

✅ Reference: HCIA-Datacom Network Principles Guide – Chapter on Link Aggregation & Stacking

Detailed Explanation:The protocol number for TCP in the IPv4 header is 6. Since Telnet uses TCP as its transport layer protocol, the protocol field in the IPv4 header will contain the value 6​​.

Detailed Explanation:In a Spanning Tree Protocol (STP) environment, the root bridge is selected based on the bridge ID. Here, SWA has the lowest bridge ID (4096:0001-0203-04AA), making it the root bridge. For each network segment, STP elects one designated port to forward traffic, and all other ports in that segment will be blocked to prevent loops.

Following the STP rules:

SWA is the root bridge, so all of its ports (G0/0/2 and G0/0/3) will be designated ports.

Each non-root switch (SWB and SWC) selects one root port, which is the port with the lowest path cost to the root bridge (SWA).

SWB ' s G0/0/3 will have a higher path cost when compared with G0/0/1 (if assuming equal link costs), thus making G0/0/1 the root port on SWB.

SWB will then block its G0/0/3 port to prevent a loop, as SWA ' s G0/0/3 is already the designated port for that link.

Hence, G0/0/3 of SWB will be in the blocking state to maintain a loop-free topology

Bridge Priority Overview:

Bridge Priority is a key parameter in Spanning Tree Protocol (STP) and is used to elect the root bridge.

The default bridge priority for Huawei switches is 32768, which is the default for many vendors.

How STP Uses Bridge Priority:

Lower bridge priority values are preferred during root bridge elections.

Administrators can modify this value for desired root bridge placement.

Comprehensive Explanation: When Router A forwards the packet to Router B, the destination IP address (11.0.12.1) remains unchanged as it is still meant for Host B. However, the destination MAC address changes to MAC-B, which belongs to Host B, since MAC addresses are only used for local network hops​

Detailed Explanation:DNS (Domain Name System) is responsible for translating human-readable domain names (like www.example.com) into IP addresses, enabling devices to locate services on a network. (Reference: HCIA-Datacom Training Material, DNS Function and Protocol Overview)