H19-132_V1.0 Exam Dumps - Huawei HCSP Presales Questions and Answers

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 42

“Detailed introduction of basic configurations-1/2 Configuration BC1L BC2L BC3L BC4L BC5L Structure Single row, cold & hot aisle containment UPS(KVA) 10kVA 10kVA*2 10kVA*3 20kVA*2 20kVA*3 Air conditioner N, N+1 Power input Single input is default Qty of IT output 12 12 24 24 24 Qty of cooling output 3 2 3 3 6 Temperature sensor, smoke sensor, SMS alarm, local app on the mobile phone, PAD, intelligent door lock, ECC800 Standard (intelligent/ no-intelligent）RPDU, video system, power backup, IT rack, remote app on the mobile phone, network rack, water Optional sensor 42”

Technical Deep Dive

UPS2000-H provides an output power factor of 1, up to 96% efficiency in double-conversion mode, and an 80–280 V AC input-voltage range. When deployed in FusionModule800, it also supports the solution’s remote monitoring and online maintenance and upgrade capabilities.

The applicable UPS2000-H specifications support an output power factor of one, high double-conversion efficiency up to 96 percent and a wide 80–280 V input range for the designated phase-voltage configuration. Remote monitoring can be provided through supported network cards and management software. The broad claim about remote online UPS upgrades depends on the specific device and firmware; management-card update functionality should not be confused with every form of UPS firmware upgrade.

FusionModule800 uses standardized configurations for different power and availability needs. Engineers must distinguish UPS apparent-power rating, permitted IT load, cooling output, power-path redundancy and installed optional functions. Validating these parameters together prevents an apparently attractive cabinet combination from failing installation, thermal management or service-continuity requirements.

Technical verification warning: Option C: online upgrades depend on model, firmware and installed management components.

Source reference: uploaded Huawei training material, PDF page 42.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 92

“Add Products to the Quotation You can add products, spare parts, or factory inspection models to a quotation. 1. On the Configure page, click Add Product. 2. Click Product. 3. Select product scope: Data Center Facility.  Tips: If you know the product name, you can search for the product directly here. For example, enter the keyword UPS5000. 4. Select the required products. 5. Click Add. 23”

Technical Deep Dive

A saved configuration model in Favorites can be added to any bill of quantities (BOQ).

Favorites can speed up repetitive proposals by reusing a previously saved product configuration instead of configuring every model from the beginning. Reuse does not excuse validation of destination-country availability, sales-part lifecycle, quotation type or product compatibility. The phrase any BOQ is too absolute: the uploaded training establishes product addition workflows, but does not explicitly confirm that Favorites bypasses every restriction. Treat the option as an intended functionality statement with that limitation.

In a production presales workflow, the configured BOQ must remain traceable to its customer and opportunity, and the product models, sales-part status, quantities and downstream commercial details must be validated before an order or quotation is finalized. A user-interface capability should not be mistaken for authorization to ignore an error or bypass role-based access restrictions.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Technical verification warning: Unrestricted Favorites-to-any-BOQ functionality is not independently established by the cited slide.

Source reference: uploaded Huawei training material, PDF page 92.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 57

“Number of cabinets 8 6 6 Environment FusionDC1000A-40ft Appearance corrosion Class A/B/C environment (Class C is not supported at -40 ~ -20 ℃ ) requirements Cool type Row-level air cooling Anti-seismic GR-63-CORE Zone 3(the modular structure) Anti-wind Beaufort scale 12 (Wind speed ≤ 130km/h) Atmospheric Meets the 1440-hour salt spray test requirements corrositivity Module lifespan 25 years Module dimension 12192 × 2438 × 2896 (D × W × H, mm) FusionDC1000A-40ft Site Note: The basic concept of A/B/C environment is defined by GB/T15957 and Huawei enterprise standards. The corresponding ISO9223/12944 environments are classified into C1, (C2, C3), and C4. 57”

Technical Deep Dive

Huawei lists 8 cabinets for the IT-N+X-380V configuration and 6 cabinets for both IT-2N-380V configurations of the FusionDC1000A. A 7-cabinet configuration is not listed.

The N+X FusionDC1000A variant contains eight IT cabinets; the 2N configurations contain six. Both support a maximum 54 kW of total IT load, with different power distributions per rack. A seven-cabinet variant is not among the listed standard configurations. Cabinet count alone does not establish IT power capacity because the rack power density also differs.

For this prefabricated 40-foot product, presales validation must distinguish physical cabinet arrangements, IT power density, UPS architecture, environmental limits, in-row cooling and the enclosure rating. A statement for one configured version must not be generalized to every deployment. Final designs also require suitable foundations, upstream connections, local safety compliance and commissioning checks.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 57.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 100

“Submit a Quotation Step 1, select the quotation, then click Submit. Step 3：select the type of the service to be submitted. Step 2：Check the BOQ. Error: If there are any errors, correct them before submitting the BOQ. Business Type Description Warning: The warning information does not affect BOQ submission. You With this option, you can create new Quotation directly. After BOQ are advised to read each alarm carefully. Create Quote submitting successfully, Quote creation page in eSales will be displayed automatically. With this option, BOQ will be submitted to an existing Quote that has Quote Quote Number been created in ePartner. After the quotation is submitted to the recipient, the Meta CPQ notifies Submit To the recipient by”

Technical Deep Dive

Meta CPQ provides the business types Commerce application, Draft, and Contract/PO; Project archiving is not one of its business types.

Project archiving is a records-management activity rather than the intended Meta CPQ quotation business type. The original alternatives use terminology that does not fully match the uploaded training table, which instead describes submission pathways such as quotation creation, manual review, forecasting and logistics estimation. The intended answer is Project archiving, but the exact menu labels need version-specific confirmation before publication.

In a production presales workflow, the configured BOQ must remain traceable to its customer and opportunity, and the product models, sales-part status, quantities and downstream commercial details must be validated before an order or quotation is finalized. A user-interface capability should not be mistaken for authorization to ignore an error or bypass role-based access restrictions.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Technical verification warning: Business-type naming differs between SCT/Meta CPQ versions.

Source reference: uploaded Huawei training material, PDF page 100.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 57

“Module dimension 12192×2438×2896 (D×W×H, mm) FusionDC1000A-40ft Site Note: The basic concept of A/B/C environment is defined by GB/T15957 and Huawei enterprise standards. The corresponding ISO9223/12944 environments are classified into C1, (C2, C3), and C4. 57”

Technical Deep Dive

The FusionDC1000A prefabricated module has a specified height of 2,896 mm, equivalent to approximately 2.9 m.

The prefabricated 40-foot module has external dimensions of 12,192 by 2,438 by 2,896 millimetres. A height of 2,896 mm is approximately 2.9 m. Site engineers must consider not just the enclosure size but also access roads, lifting clearance, foundation and cooling equipment service zones. The product height is not identical to total required installation clearance.

For this prefabricated 40-foot product, presales validation must distinguish physical cabinet arrangements, IT power density, UPS architecture, environmental limits, in-row cooling and the enclosure rating. A statement for one configured version must not be generalized to every deployment. Final designs also require suitable foundations, upstream connections, local safety compliance and commissioning checks.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 57.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 40

“Converged cabinet configuration: flexible for batch production(For standard 380V scenarios) BC1L BC2L BC3L BC4L BC5L UPS 10K*1 10K*2 10K*3 20K*2 20K*3 Configurations 0~10KW(1+1) 10~20KW(N+1) 10~18KW(1+1) 30~36KW(N+1) Power Density 0~10KW 10~20kW 20~25kW 18~30kW 36~40kW 24U 40”

Technical Deep Dive

FusionModule800 documentation identifies BC2L and BC4L as the configurations whose UPS supports 2N redundancy or continuous cooling.

Continuous cooling means that the required cooling equipment is supported by an appropriate backup-power arrangement during an input interruption. Huawei identifies BC2L and BC4L as the configurations offering the relevant optional feature or 2N UPS arrangement. This should not be confused with N+1 cooling-unit redundancy: a spare air-conditioner cannot provide cooling if its electrical supply is absent. Both power-path design and cooling availability need to be evaluated.

FusionModule800 uses standardized configurations for different power and availability needs. Engineers must distinguish UPS apparent-power rating, permitted IT load, cooling output, power-path redundancy and installed optional functions. Validating these parameters together prevents an apparently attractive cabinet combination from failing installation, thermal management or service-continuity requirements.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 40.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 31

“FusionModule2000 power supply and distribution systems are mainly composed of the following parts： Smart Module A：Integrated UPS （In Row/Out Row）+ rPDU Smart Module B ：Integrated PDC/Modular PDC/Smart busbar+AC PDC+rPDU 31”

Technical Deep Dive

Huawei’s FusionModule2000 6.0 installation documentation explicitly provides an optional “Installing an Outside-Module UPS” procedure, so an external UPS deployment is supported.

FusionModule2000 permits an integrated UPS inside the module or an optional external UPS installation. The outside-module arrangement can suit a separate electrical room or customer-specific space restrictions, provided protective devices, grounding, distribution and maintenance clearances are engineered correctly. Huawei's installation guide explicitly includes an optional outside-module UPS procedure. The correct architecture depends on site layout and availability requirements.

FusionModule2000 combines electrical distribution, precision cooling and infrastructure monitoring in a scalable module design. Equipment selection must consider the actual load, local power availability, cooling redundancy, cabinet space and controller integration. Product-family capabilities can depend on whether the design uses an integrated UPS, external UPS, distribution cabinet or intelligent busbar.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 31.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 29

“All-In-One Structure, One-Stop Delivery, On-Demand Expansion NetEco6000 Management System Cable Trough Cooling 25/35/46/65kW Contained Aisle IT Cabinet Customer Benefits 42/47U • One-stop delivery, lower the requirements 600/800mm for design, delivery and management • On-demand deployment & expansion, lower the initial investment Local Mgmt. System Integrated UPS / PDC • Energy-saving, cooling energy saving by 60/125/180kVA 8%+ • O & M efficiency improved by 20% 29”

Technical Deep Dive

NetCol5000 is the in-row smart cooling product that provides the cooling function for a FusionModule2000 system. NetEco and ECC800-Pro perform management or monitoring roles, while a UPS provides power backup.

NetCol5000 provides the in-row smart cooling function. The other names identify distinct subsystems: NetEco for centralized management, ECC800-Pro for local monitoring and UPS for electrical continuity. In-row cooling reduces the path between server exhaust and the heat exchanger, helping maintain stable inlet temperatures. Capacity and redundancy should be selected from the actual heat load and ambient design conditions.

FusionModule2000 combines electrical distribution, precision cooling and infrastructure monitoring in a scalable module design. Equipment selection must consider the actual load, local power availability, cooling redundancy, cabinet space and controller integration. Product-family capabilities can depend on whether the design uses an integrated UPS, external UPS, distribution cabinet or intelligent busbar.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 29.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 32

“FusionModule2000 System Overview—Power System In row UPS inside UPS+Integrated PDC， Maximum 180kW for one module Maximum 145kW for one module UPS+ precision PDC UPS+ Smart Busbar, Maximum 235kW for Maximum 310kW for one one module module 32”

Technical Deep Dive

FusionModule2000 smart busways provide modular, tap-off power distribution that supports on-demand expansion and simpler installation. Replacing end-of-suite distribution equipment frees cabinet space, and the integrated distribution path reduces power-distribution loss. Huawei documents smart busway as a FusionModule2000 power-distribution option and describes the platform’s modular design as supporting on-demand deployment and flexible expansion.

Busbar distribution facilitates modular tap-off connections and later expansion without requiring a new end-of-row distribution cabinet for every change. Moving distribution away from some rack footprints can release usable space. A properly designed busbar can also reduce connection complexity and resistive losses, although losses depend on conductor cross-section, current and installation quality. Factory-made sections simplify installation when electrical loading, earthing and protection coordination are correct.

FusionModule2000 combines electrical distribution, precision cooling and infrastructure monitoring in a scalable module design. Equipment selection must consider the actual load, local power availability, cooling redundancy, cabinet space and controller integration. Product-family capabilities can depend on whether the design uses an integrated UPS, external UPS, distribution cabinet or intelligent busbar.

Source reference: uploaded Huawei training material, PDF page 32.

Exact Extract — Huawei HCSA-Presales-Data Center Facility (Modular DC) V1.0 Training Material, PDF page 150

“Four Safety Management Phases — Promoting the Transformation to Self-management or Even Team Management Supervision and By instinct Self-management Team management management Common phase Instinct Dependent Supervision and Independent Self-management Mutual By instinct help Team management management Act by instinct and show The management layer Fulfill safety commitments, Proactively correct obedience. Safety makes safety greatly improve safety others' violations, and personnel are commitments. Safety knowledge and skills, show care for others' responsible for safety. personnel can be a consciously abide by safety, team honor, and The management layer deterrent to employees. disciplines, pay attention to safety beyond work. does not directly Safety rules and safety issues, and develop manage safety issues. procedures are in place. good safety habits”

Technical Deep Dive

Team management involves actively addressing colleagues’ unsafe violations and taking responsibility for the safety and reputation of the team, including concern that extends beyond the workplace.

Team management is the most mature of the four safety phases because employees take responsibility for co-workers rather than merely following their own instructions. By instinct involves reactive obedience; supervision relies heavily on external oversight; self-management emphasizes personal compliance. In team management, personnel proactively intervene when unsafe behavior occurs and demonstrate concern for group safety beyond the immediate task.

The control is relevant to data center delivery sites containing electrical distribution, UPS batteries, cooling equipment and construction activities. Effective implementation combines assigned safety responsibilities, site risk assessment, applicable technical controls, personnel competence and incident reporting. Required protective measures must be selected for the actual hazard and comply with relevant local legal and engineering requirements.

Verification principle: confirm the exact product revision, operating condition, selected option and relevant Huawei documentation before using this result in a customer proposal. A feature shown for a particular configuration should not automatically be assumed to apply to every module or installation; normal technical, commercial and safety checks still apply.

Source reference: uploaded Huawei training material, PDF page 150.

BATCH 3 • QUESTIONS 31–45