H19-338 Exam Dumps - Huawei Certification Questions and Answers

Huawei CloudFabric solution has been awarded Gartner’s “Customer Choice” three times by March 2021. According to the Huawei CloudFabric Solution Wins Gartner Peer Insights Customers’ Choice for Third Consecutive Year article, Huawei CloudFabric solution received this honor in 2019, 2020, and 2021.

The switch that does not support iStack is S1730S-H. This is because the S1730S-H does not have any stack ports or support stack cards. The iStack technology allows multiple switches to be connected and managed as a single logical device, which improves network scalability and reliability.

The CloudEngine 16800 series switches do not support 4, 8, 12, and 16 LPU slots. According to the CloudEngine 16800 Series Data Center Switches Datasheet, CloudEngine 16800 series switches support three models: CE16804 (4 LPU slots), CE16808 (8 LPU slots), and CE16816 (16 LPU slots). There is no model that supports 12 LPU slots.

CloudEngine S5731-H supports VxLAN. It can implement Layer 2 and Layer 3 gateways for VxLANs, support centralized and distributed gateways, and interwork with BGP-EVPN to implement inter-subnet communication between VxLANs3. CloudEngine S5731-H delivers a switching performance of 336 Gbit/s3. CloudEngine S5731-H supports MPLS and can provide L2VPN and L3VPN services based on MPLS tunnels. CloudEngine S5731-H supports 2-port 40GE and 8-port 10GE optical/electrical cards that can be installed in the extended slot

NE8000 M14 cannot be deployed in a 300 mm-deep cabinet. According to the Huawei NetEngine 8000 M14 Routers Support Guide1, the NE8000 M14 requires a cabinet with a depth of at least 800 mm.

Free mobility cannot be deployed for traffic between VNs. Free mobility is supported only for policies in a VN. Communication between VNs can be directly implemented on the border node or through the external firewall. Free mobility is a feature that allows users to access network resources without changing their IP addresses or VLANs when they move within a VN. Communication between VNs requires inter-VN routing or firewall policies to ensure security and isolation.

The WAN-side controller can manage only WAN services, not LAN services. The LAN-side controller can manage both LAN and WAN services. This is because the LAN-side controller supports both SD-WAN and SD-Campus functions, while the WAN-side controller only supports SD-WAN functions.

NetEngineAR611W is a desktop router that is designed for small enterprises and SOHO enterprises. It integrates security and Wi-Fi functions, and its design is risk-free. NetEngineAR611W supports multiple WAN interfaces, such as ADSL2+, VDSL2, GE, and LTE. It also supports firewall, VPN, IPSec, NAT, and other security features. NetEngineAR611W can provide Wi-Fi coverage for up to 32 users.

The leader AP does not establish a CAPWAP tunnel with the fit AP. The leader AP communicates with the fit AP through the management VLAN, and the fit AP establishes a CAPWAP tunnel with the AC. In tunnel forwarding mode, user traffic needs to pass through the leader AP. In direct forwarding mode, user traffic is directly transmitted from the AP egress rather than from the leader AP. In tunnel forwarding mode, the leader AP can manage more fit APs than in direct forwarding mode.

The model that is not included in the CloudEngine S7700 family is S7709. The CloudEngine S7700 family consists of three models: S7703, S7706, and S7712. These are smart routing switches designed for next-generation enterprise networks, with features such as wired and wireless convergence, unified user management, quality awareness, and SVF 2.04