H20-923_V1.0 Exam Dumps - Huawei HCSP-Field Questions and Answers

The correct sequence prioritizeselectrical safety first, then mechanical disassembly. You mustconfirm the batteries are not discharging(Step 1) to avoid working under load. Next, the cabinet must be placed into a safe powered-down state byswitching off the battery circuit breaker and long-pressing the POWER ON/OFF button to power off the cabinet(Step 6). Only after the cabinet is safely powered down should you open up the working area byremoving the front covers of the faulty module and adjacent modules(Step 3). Then youturn off the ready switchon the battery management module (Step 2) to prevent the system from re-enabling the module unexpectedly during maintenance. After that, youloosen the securing bolts and pull out the battery management module about 10 cm(Step 5) to create operating space and ensure isolation for subsequent operations. With the cabinet safely stopped, you canremove the cables and copper barsconnected to the faulty module (Step 7), and finallyremove the baffle plate and pull out the faulty battery module(Step 4).

Huawei’s scenario-based data center facility portfolio is organized around clearly defined solution families that map to typical deployment scenarios and site sizes. FusionModule500 and FusionModule2000 are smart modular data center solutions designed for standardized, fast deployment in equipment rooms and enterprise edge/branch scenarios.They integrate key subsystems such as power supply and distribution, cooling, monitoring, and optional fire protection into a modular architecture that reduces footprint and accelerates on-site delivery. Likewise, FusionDC1000 is Huawei’s prefabricated modular data center series, delivered as complete, factory-integrated modules that combine civil engineering elements with electromechanical infrastructure for rapid construction, predictable quality, and scalable expansion across different capacity tiers. In contrast, FusionDC800 is not used as a defined scenario-based solution name within Huawei’s mainstream data center facility solution lineup (where “FusionDC” offerings are represented by the FusionDC1000 series and “FusionModule” offerings by numbered FusionModule solutions). Therefore, FusionDC800 is the option that does not match Huawei’s scenario-based solution naming.

Huawei data center facility design typically follows a layered fire protection concept: early detection, controlled alarm linkage, and suppression methods that protect equipment and ensure personnel safety. A smoke detection system (often combined with staged alarms) provides early warning so operators can verify events and initiate emergency procedures. For the IT white space, a clean-agent gas extinguishing system is preferred because it suppresses fire without leaving residue and significantly reduces the risk of corrosion or contamination compared with powder-based agents. The extinguishing system is normally integrated with linkage/interlock controls: audible/visual pre-discharge alarms, time delay, emergency abort, door access control logic, and HVAC shutdown or damper control to help maintain agent concentration. This coordinated mechanism reduces false discharge risk while preserving a reliable automatic response if a real fire develops. In contrast, relying only on manual extinguishers is too slow for rapid fire growth, and water sprinklers alone can cause substantial collateral damage to servers and power equipment.

As data center power density increases (especially driven by AI and high-performance computing), the industry trend is to adoptliquid coolingin high-density scenarios because liquid has much higher heat transfer capability than air, enabling stable cooling where rack power is very high. This makes statementAtrue. The combination ofCloud + AIpushes operators to reduce PUE and total energy cost through more intelligent control, higher efficiency cooling architectures, and integrated energy management, so statementBis also true. For large data centers, another clear trend is increasingchilled-water supply/return temperatures(higher inlet and outlet temperatures). Warmer water improves chiller efficiency, expands the number of hours that free cooling can be used, and reduces compressor work, soDis true. However,evaporative coolingis not universally the “main solution” for large data centers because it is climate- and water-condition dependent and is typically deployed as one option among multiple architectures rather than the dominant default everywhere. Therefore,Cis the incorrect statement.

In Huawei lithium battery cabinet alarm design, the MDU indicator and buzzer are coordinated to help O&M personnel immediately judge alarm severity without logging into a management system. Acritical alarmindicates that the battery system may no longer be in a fully safe or supported operating state and requires urgent handling, such as load protection actions, isolation, or immediate inspection. For this highest severity level, the cabinet uses the most prominent visual pattern:red with fast blinking, paired with acontinuous buzzer, to ensure the condition cannot be overlooked in an equipment room environment. Yellow indicators are reserved for lower severities such as warnings or minor/major alarms, where the system remains controllable and the required response can be scheduled. A steady red is typically used to indicate a persistent fault state or stop condition, whereasfast blinking red + continuous buzzeris the clear “critical, urgent” combination that triggers immediate on-site response and rapid fault localization (such as checking protection events, contactor status, temperature/voltage exceptions, and isolation conditions).

For onsite replacement of a UPS power module, Huawei’s maintenance logic follows a safe “isolate → remove → insert → re-enable” sequence controlled by the moduleready switch. During removal, the ready switch must be rotated to theOFFstate first so the module is logically isolated from operation and will not participate in power conversion. After isolation, the four fixing screws are removed and a short waiting period is required to allow internal energy in capacitors to discharge before the module is pulled out. This matches statement②. During installation, the ready switch must remainOFFbefore insertion to prevent unintended startup or arcing during connector engagement. The module is placed in position, inserted slowly and evenly until fully seated, then secured with the four screws. Only after mechanical fastening and full seating is confirmed should the ready switch be rotated to theONstate to allow the system to recognize and bring the module online. This matches statement④.

Huawei data center power distribution design prioritizes continuity for critical loads. For single-cord IT equipment that cannot accept dual inputs, an STS provides a practical high-availability approach by connecting the load to two independent AC sources (often A and B feeds) and transferring the load to the healthier source when abnormalities occur. The key value is speed and coordination: the STS detects voltage/frequency deviations or source failure and performs a rapid transfer to minimize or eliminate interruption seen by the load. This supports O&M strategies where upstream systems (UPS, PDUs, distribution boards) are maintained or isolated without forcing downtime on single-cord devices. In routine operations, STS status, transfer logs, alarms, and source quality parameters are monitored to prevent nuisance transfers and to ensure correct upstream selectivity and grounding. Correct commissioning also ensures the two sources meet synchronization conditions and that bypass/maintenance procedures are standardized, improving safety and reducing operational risk.

For FusionCol8000-C chilled-water systems, Huawei commissioning requires awater leakage/pressure-holding teston the chilled-water piping after installation to verify joint sealing, valve interfaces, and connection integrity before long-term operation. The specified method is toraise the water pressure in the chilled-water pipe to 0.8 MPa, then observe for30 minutesto confirm there is no visible leakage. If the system remains dry, the same pressure isretained for 24 hoursas a stability verification step. The acceptance criterion is that thepressure drop is less than 0.01 MPaover the 24-hour period and no leakage is found, which demonstrates that the piping and fittings meet tightness requirements under the prescribed test pressure. This procedure helps prevent future failures such as slow seepage, corrosion around joints, insulation waterlogging, and unexpected shutdowns caused by water loss or low differential pressure alarms. It also ensures that subsequent flushing, venting, and operational commissioning can be performed safely and reliably.