HPE6-A79 Exam Dumps - HP ACMX Questions and Answers

Page: 1 / 1

Questions 4

Refer to the exhibits.

Exhibit 1

Exhibit 2

Exhibit 3

Exhibit 4

A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.

Which names correlate with the authentication and captive portal servers?

Options:

ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.

ClearPass.23 is the authentication server, and MC2 is the captive portal server.

Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.

cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.

Buy Now

Questions 5

A software development company has 764 employees who work from home. The company also has small offices located in different cities throughout the world. During working hours, they use RAPs to connect to a datacenter to upload software code as well as interact with databases.

In the past two month, cabling issues have occurred connection to the 7240XM Mobility Controller (MC) that runs ArubaOS 8 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second 7240XM controller for redundancy.

How should the network administrator deploy both controllers in order to provide the redundancy while preventing failover events from disconnecting users?

Options:

Connect both controllers with common VLANs. and create an HA fast failover group with public addresses in the internet VLAN.

Connect both controllers with common VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.

Connect both controllers with different VLANs. and create an L2-connected cluster using public addresses in the internet VLAN.

Connect both controllers with common VLANs. and configure LMS/BLMS values equal to public addresses in the internet VLAN.

Buy Now

Questions 6

An organization wants to deploy a WLAN infrastructure that provides connectivity to these client categories:

• Employees

• Contractors

• Guest users

• Corporate IoT legacy devices that support no authentication or encryption

Employees and contractors must authenticate with company credentials and get network access based on AD group membership. Guest users are required to authenticate with captive portal using predefined credentials. Only employees will run L2 encryption.

Which implementation plan fulfills the requirements while maximizing the channel usage?

Options:

Create VAP1 to run WPA2-AES and 802.1x authentication. VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal and L2 fail through.

Create a single VAPto run WPA2-AES and 802.1x authentication. MAC authentication L2 fail through, captive portal, and VIA support.

Create VAP1 to run WPA2-AES and 802.1x authentication. VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal.

Create VAP1 to run WPA2-AES and 802.1x authentication, and VAP2 to run opensystem encryption with MAC authentication and captive portal.

Buy Now

Questions 7

Refer to the exhibit:

A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit.

What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?