NS0-077 Exam Dumps - Netapp Hybrid Cloud Administrator Questions and Answers

For the SG5860, which uses the SG5800 controller, StorageGRID supports both Fixed and Aggregate port-bond configurations. In Fixed mode, ports 2 and 4 are paired for the Grid Network and ports 1 and 3 for the Client Network. Active-Backup is the default network bond mode, and VLAN tagging is optional; therefore, the two-port Active-Backup configuration in A is supported.

In Aggregate port bond mode, all four 10/25-GbE ports form a single LACP (802.3ad) bond carrying both Grid and Client Network traffic. Because both networks share the aggregate, StorageGRID requires a unique VLAN tag for each network, making C the supported aggregate configuration. A four-port Active-Backup aggregate is not supported, eliminating B.

Verification note: the current NetApp SG5800 appliance documentation also permits two-port LACP bonds in Fixed mode, with VLAN tagging optional. Consequently, option D is technically supported as written, making this question ambiguous against current documentation. If restricted to the intended two-answer certification key representing the standard Fixed Active-Backup and Aggregate LACP configurations, A and C are the expected selections.

Reference topics: SG5800/SG5860 Appliance Networking → Fixed Port Bond Mode → Aggregate Port Bond Mode → Active-Backup → LACP → VLAN Tagging

For unidirectional cross-grid replication, CGR must be enabled on the bucket in the grid that acts as the source. NetApp states that when CGR is enabled on only one grid, objects added to that source bucket are replicated automatically to the corresponding destination bucket on the other grid; objects written to the destination are not replicated back. Because the required direction is Grid-1 → Grid-2, CGR must therefore be enabled on Grid-1.

The administrator then selects the appropriate grid federation connection and sets Replicate delete markers = Yes. When an S3 client deletes an object without specifying a version ID, StorageGRID creates a delete marker. With this option enabled, that marker is replicated to Grid-2 so the object appears deleted on both grids, helping maintain matching bucket state. NetApp documents this as the default behavior.

Option A would configure bidirectional replication, which violates the unidirectional requirement. Option B reverses the required replication direction. Option D is incorrect because the relevant CGR configuration control is Replicate delete markers, not “Replicate metadata.”

Reference topics: Tenant Manager → Grid Federation → Cross-Grid Replication → Source and Destination Buckets → Versioning → Replicate Delete Markers

When an existing StorageGRID deployment is expanded with nodes whose Grid Network IP addresses are on a subnet that has not previously been used, that subnet must be added to the Grid Network subnet list before the expansion is started. StorageGRID maintains this list so that every grid node can correctly route internal Grid Network traffic to the other participating subnets. NetApp StorageGRID 12.0 documentation explicitly states that if any new node uses a new Grid Network subnet, the administrator must add that subnet first; otherwise, the expansion must be cancelled, the subnet added, and the expansion restarted.

The configuration is performed in Grid Manager → Maintenance → Network → Grid Network, where the administrator selects Add another subnet and enters the network in CIDR notation. StorageGRID then distributes the routing configuration throughout the grid.

Option A is incorrect because routes do not need to be configured manually on every node. Option B is incorrect because a StorageGRID Gateway Node provides client load-balancing functions and is not an IP router between Grid Network subnets. Option D is also incorrect; StorageGRID explicitly supports multiple Grid Network subnets, provided they are routable through the configured Grid Network gateway.

Reference topics: StorageGRID Expansion → Grid Network → Grid Network Subnet List → Adding Nodes on New Subnets → Grid Network Routing

When a physical or virtual host containing multiple StorageGRID nodes fails, NetApp defines a specific recovery-order requirement when one of those nodes is the primary Admin Node. StorageGRID 12.0 documentation states that if the failed server hosts the primary Admin Node, the primary Admin Node must be recovered first. This prevents subsequent node-recovery operations from stopping while attempting to communicate with services associated with the primary Admin Node.

Therefore, the administrator should deploy a replacement VM for the primary Admin Node and perform the documented primary Admin Node recovery. After the primary Admin Node is operational, recovery of the failed Gateway Node can proceed, restoring the intended client load-balancing path.

Option A is invalid because StorageGRID does not permit adding a primary Admin Node through an expansion; the primary Admin Node is established during initial installation and a failed one must be recovered. Options B and D incorrectly prioritize the Gateway Node while the failed host also contains the primary Admin Node. The StorageGRID 12.0 recovery guidance explicitly requires the primary Admin Node to be handled first in this situation.

Reference topics: Maintenance → Node Recovery → Primary Admin Node Recovery → Multiple Nodes on Failed Host → Gateway Node Recovery → Load Balancer Service

The correct combination is read-after-new-write consistency with Balanced ingest. The workload contains log objects that are written once and subsequently read, so read-after-new-write provides the required behavior: StorageGRID guarantees read-after-write consistency for new objects, while maintaining high availability. NetApp recommends this consistency setting for most workloads. Because these SIEM log objects are not expected to be updated after creation, the eventual-consistency behavior for updates is not material to this use case.

The ingest requirement is decisive. The EC7+5 placement spans three sites, but clients must remain able to ingest when one site is unavailable. With Strict ingest, StorageGRID must satisfy the ILM placement instructions synchronously before acknowledging the write. If the required EC placement cannot be created because a site is down, the request fails. In contrast, Balanced attempts the specified ILM placement immediately but, when an outage prevents that placement, StorageGRID falls back to dual-commit protection and acknowledges the object. ILM subsequently creates the required EC7+5 placement when resources become available again.

all is inappropriate because it requires every metadata node to receive metadata immediately, reducing availability during failures. Therefore, D satisfies both immediate visibility of newly written logs and continued ingest during a site outage.

Reference topics: S3 Bucket Consistency → Read-after-new-write → ILM Ingest Behavior → Balanced vs Strict → Erasure Coding → Multisite Availability

For regulatory retention in StorageGRID, the required mechanisms are S3 Object Lock and a compliant default ILM rule. StorageGRID implements write-once-read-many protection through S3 Object Lock. NetApp states that the global S3 Object Lock setting must be enabled before tenants can create buckets with S3 Object Lock enabled. Once enabled globally, the setting cannot be disabled.

There is also a mandatory ILM dependency. NetApp explicitly requires the default rule in every active ILM policy to be compliant before global S3 Object Lock can be enabled. A compliant default rule must maintain at least two replicated copies or one erasure-coded copy on Storage Nodes, must begin protection at day 0 using Ingest time, cannot place the protected copies in a Cloud Storage Pool, and must include a placement extending forever.

Option A is incorrect because SnapLock is an ONTAP WORM technology and is not the StorageGRID compliance mechanism. Option B is also incorrect: StorageGRID regulatory retention does not require an administrator-configured “Compliance Clock.” Object retention is enforced through S3 Object Lock retain-until dates, retention modes, legal holds, and compliant ILM placement.

Reference topics: S3 Object Lock → Regulatory Compliance → Compliant ILM Rules → Default ILM Rule → Retention and Legal Hold

StorageGRID Platform Services traffic, including Apache Kafka event notifications, originates from Storage Nodes that run the Administrative Domain Controller (ADC) service. NetApp explicitly requires these ADC Storage Nodes to have network connectivity to external Platform Services endpoints. For Kafka, StorageGRID normally establishes outbound TCP connectivity from ADC Storage Nodes to the Kafka cluster, using port 9092 by default unless another port is configured.

In this topology, the Storage Nodes do not have Client Network interfaces, so they cannot use a Client Network default route to reach the Kafka endpoint. NetApp's supported alternative is to configure the Storage Nodes with Admin Networks containing appropriate Admin External Subnet List (AESL) entries that provide routes to the external endpoint network. Without the required AESL route on the ADC nodes, StorageGRID cannot validate connectivity to the Kafka endpoint.

Option B incorrectly identifies LDR as the service responsible for sending Platform Services messages. Option D is irrelevant because Gateway Nodes do not originate these Kafka Platform Services notifications. Although Platform Services must be enabled for the tenant, the networking details in the scenario specifically identify missing ADC-node endpoint routing as the intended failure.

Reference topics: Platform Services → Kafka Event Notifications → ADC Service → Admin Network → AESL → External Endpoint Connectivity

For a StorageGRID node running as a VMware virtual machine, NetApp requires the node to be gracefully shut down before hypervisor migration or maintenance. The supported migration approach is therefore a cold migration, in which the StorageGRID node is stopped before it is moved to another ESXi host. NetApp documentation explicitly states that cold migration is supported.

Option A is specifically unsupported. NetApp warns that VMware live vMotion can cause the virtual machine clock to jump. StorageGRID depends heavily on synchronized time for distributed database operations, object metadata, configuration updates, and inter-node coordination. A time discontinuity can therefore lead to data or configuration integrity problems, which is why live vMotion must not be used for StorageGRID grid nodes.

Option B is incorrect because StorageGRID appliance maintenance mode is intended for specific appliance maintenance procedures; it is not the prescribed migration workflow for a VMware-hosted software Storage Node. Option C is also not the required host-maintenance procedure and unnecessarily introduces datastore-level movement considerations.

Thus, the correct sequence is to gracefully shut down the StorageGRID VM and perform a cold migration to another ESXi host, preserving grid integrity while host maintenance is performed.

Reference topics: VMware Deployment → Hypervisor Maintenance → StorageGRID Node Shutdown → VMware Migration Restrictions → Cold Migration