XK0-005 Exam Dumps - CompTIA Linux+ Questions and Answers

The command ssh-copy-id user@server will allow the user to upload the public key to a remote server and enable passwordless login. The ssh-copy-id command is a tool for copying the public key to a remote server and appending it to the authorized_keys file, which is used for public key authentication. The command will also set the appropriate permissions on the remote server to ensure the security of the key. The command ssh-copy-id user@server will copy the public key of the user to the server and allow the user to log in without a password. This is the correct command to use for this task. The other options are incorrect because they either do not copy the public key (scp, rsync, or ssh-add) or do not use the correct syntax (scp ~/.ssh/id_rsa user@server:~/ instead of scp ~/.ssh/id_rsa.pub user@server:~/ or rsync ~ /.ssh/ user@server:~/ instead of rsync ~/.ssh/id_rsa.pub user@server:~/). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 13: Managing Network Services, page 410.

The following commands can help you confirm that the new RAID adapter has been recognized by the Linux system:

dmesg: This command displays the kernel messages, which can show the information about the newly detected hardware device. You can use dmesg | grep -i raid to filter the output for RAID-related messages.

lshw -class disk: This command lists the disk devices on the system, including the RAID controller and its model name. You can use lshw -class disk | grep -i raid to filter the output for RAID-related information1.

The other commands are not relevant for this purpose. For example:

rmmod: This command removes a module from the Linux kernel, which is not useful for detecting a new device.

ls -l /etc: This command lists the files and directories in the /etc directory, which is not related to hardware devices.

pvdisplay: This command displays the attributes of physical volumes, which are part of the logical volume management (LVM) system, not the RAID system.

rmdir /dev: This command removes an empty directory, which is not helpful for detecting a new device. Moreover, /dev is a special directory that contains device files, and should not be removed.

The slowness is caused by the CPU being overloaded. The iostat command shows that the CPU utilization is 100%, which means that there are more processes competing for CPU time than the CPU can handle. The other options are incorrect because:

The system is not running out of swap space, as shown by the iostat command, which shows that there is no swap activity (si and so columns are zero).

The memory is not exhausted, as shown by the free -m command, which shows that there is still available memory (avail column) and free buffer/cache memory (buff/cache column).

The processes are not paging, as shown by the vmstat command, which shows that there are no major page faults (majflt column) and no swap activity (si and so columns). References: CompTIA Linux+ Study Guide, Fourth Edition, page 417-419, 424-425.

The correct order of Git commands to add a new configuration file to a Git repository is pull -> add -> commit -> push. The pull command will fetch and merge the changes from the remote repository to the local repository, ensuring that the local repository is up to date. The add command will stage the new configuration file for the next commit, marking it as a new file to be tracked by Git. The commit command will create a new snapshot of the project state with the new configuration file and a descriptive message. The push command will publish the commit to the remote repository, updating the remote branch with the new configuration file. The pull -> push -> add -> checkout order is incorrect, as it will not create a commit for the new configuration file, and it will switch to a different branch without pushing the changes. The checkout -> push -> add -> pull order is incorrect, as it will switch to a different branch before adding the new configuration file, and it will overwrite the local changes with the remote changes without creating a commit. The pull -> add -> push -> commit order is incorrect, as it will not create a commit before pushing the changes, and it will create a commit that is not synchronized with the remote branch. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 20: Writing and Executing Bash Shell Scripts, page 579.

The command vmstat will most likely be run next by the administrator to troubleshoot the system performance. The vmstat command is a tool for reporting virtual memory statistics on Linux systems. The command shows information about processes, memory, paging, block IO, interrupts, and CPU activity. The command can help the administrator identify the source of the performance issue, such as high CPU usage, low free memory, excessive swapping, or disk IO bottlenecks. The command can also be used with an interval and a count to display the statistics repeatedly over time and observe the changes. The command vmstat will provide useful information for diagnosing the system performance and finding the root cause of the issue. This is the most likely command to run next after the top command. The other options are incorrect because they either do not show the virtual memory statistics (strace or lsof) or do not provide more information than the top command (htop). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Processes and Scheduling Tasks, page 425.

Ctrl+Z suspended the process, and "fg" will bring it back into the foreground of the shell

A Comprehensive and To go back to a program that was suspended by pressing Ctrl+Z in the command line, the command that can be used is fg. The fg command stands for foreground, and it resumes the job that is next in the queue and brings it to the foreground. Alternatively, if there are more than one suspended jobs, fg can be followed by a job number to resume a specific job. The other commands are incorrect because they either do not resume a suspended job, or they have different functions such as switching user (su), pushing a job to the background (bg), or editing a file (ed). References: CompTIA Linux+ Study Guide, Fourth Edition, page 181-182.

The push action is used to publish the changes made in a local branch to a remote branch of a Git repository. This action will update the remote branch with the commits made in the local branch and synchronize the two branches. The rebase action is used to reapply commits from one branch onto another branch, creating a linear history of commits. This action does not publish any changes to a remote repository. The tag action is used to create an annotated reference to a specific commit in a Git repository. This action does not publish any changes to a remote repository. The commit action is used to record changes made in the local repository and create a new snapshot of the project state. This action does not publish any changes to a remote repository. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 20: Writing and Executing Bash Shell Scripts, page 579.

To prevent certain files from being tracked by Git, the administrator can use a .gitignore file (B) in the repository. The .gitignore file can specify patterns of files or directories that Git should ignore. This way, the Terraform state files will not appear in the main branch or any other branch. The other commands are not related to this requirement. References:

[CompTIA Linux+ Study Guide], Chapter 10: Working with Git, Section: Ignoring Files with .gitignore

[How to Use .gitignore File]

The df -h command can be used to identify the filesystem that is full. This command displays the disk usage of each mounted filesystem in a human-readable format, showing the total size, used space, available space, and percentage of each filesystem. The lsblk command displays information about block devices, not filesystems. The fdisk command can be used to manipulate partition tables, not check disk usage. The du -ah command displays the disk usage of each file and directory in a human-readable format, not the filesystems. References: [CompTIA Linux+ (XK0-005) Certification Study Guide], Chapter 14: Managing Disk Storage, page 454.

After installing a new version of a package that includes a configuration file that already exists on the system, such as /etc/httpd/conf/httpd.conf, RPM will create a new file with the .rpmnew extension instead of overwriting the existing file. This allows the administrator to review the default configuration that shipped with this version and compare it with the current configuration before deciding whether to merge or replace the files. The /etc/named.conf.rpmsave file is created by RPM when a package is uninstalled and it contains a configuration file that was modified by the administrator. This allows the administrator to restore the configuration file if needed. The /etc/named.conf file is the main configuration file for the BIND name server, not the httpd web server. The /etc/bind/bind.conf file does not exist by default in Linux systems. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 19: Managing Packages and Software, page 561.