101-500 Exam Dumps - LPIC Level 1 Questions and Answers

 The ext3 and ext2 filesystems preallocate a fixed number of inodes at the filesystem’s make/creation time and do not generate them as needed. This means that the number of inodes in these filesystems is determined by the size of the partition and the inode ratio, which is usually 16 KB per inode. The inode ratio can be specified when creating the filesystem with the mke2fs command. The number of inodes in these filesystems cannot be changed dynamically, unless the filesystem is reformatted. This can lead to inode exhaustion, which occurs when all the available inodes are used up, even if there is still free disk space. To avoid this problem, it is advisable to estimate the number of files and directories that will be stored on the filesystem and adjust the inode ratio accordingly. The other options are incorrect because they do not preallocate a fixed number of inodes at the filesystem’s make/creation time. The JFS and XFS filesystems use dynamic inode allocation, which means that they create inodes as needed, depending on the file and directory creation. The procfs filesystem is a virtual filesystem that does not store any data on the disk, but provides information about the processes and the kernel. Therefore, it does not have any inodes.

For more information on how inodes work and how to manage them, you can refer to the following articles:

Inodes in Linux: limit, usage and helpful commands | Stackscale

filesystems - What is an inode? - Unix & Linux Stack Exchange

Allocation Methods | Linux.org

The character that, added to the end of a command, runs that command in the background as a child process of the current shell is the ampersand symbol (&). This means that the command will not block the shell and the user can enter other commands while the background command is running. The background command will also not receive any input from the keyboard or the terminal. The shell will print the job number and the process ID of the background command, and the user can use the jobs command to list the status of all background jobs in the current shell session. To bring a background job to the foreground, the user can use the fg command with the job number or the process ID. To terminate a background job, the user can use the kill command with the process ID.

The other characters are not valid or relevant for running a command in the background. The exclamation mark (!) is used to access the command history or to negate a condition. The plus sign (+) is used for arithmetic operations or to append text. The percent sign (%) is used for arithmetic operations or to refer to a job number. The hash sign (#) is used for comments or to specify a hexadecimal number.

 The dpkg command is a tool to install, build, remove and manage Debian packages. The option --remove is used to remove an installed package, but it does not remove the configuration files that may have been modified by the user. The option --purge is used to remove an installed package and also delete its configuration files. This can be useful if the user wants to completely uninstall a package and start from scratch if it is reinstalled later. The syntax is: dpkg --remove package or dpkg --purge package. For example, dpkg --remove nginx will remove the nginx web server package, but it will leave the configuration files in /etc/nginxdpkg --purge nginx will remove the nginx package and also delete the configuration files in /etc/nginx1. The other options are not correct because:

–remove only removes the program, --purge only removes the config files: This is false, because --purge also removes the program, not just the config files.

–remove removes a package, --purge also removes all packages dependent on it: This is false, because --purge does not remove any other packages, only the specified one. To remove a package and its dependencies, the apt-get command can be used with the option --auto-remove2.

–remove removes only the package file itself, --purge removes all files related to the package: This is false, because --remove also removes the files that are installed by the package, not just the package file itself. --purge only removes the configuration files that are not removed by --remove. References:

dpkg(1) — dpkg — Debian buster — Debian Manpages

How to remove a package and its dependencies with dpkg? - Ask Ubuntu

The tr command is used to translate or delete characters from a given input. The -d option specifies that the characters in the second argument should be deleted from the input. In this case, the second argument is aieou, which are the vowels in the English alphabet. Therefore, the tr command will delete any vowel from the input, which is Hello World. The output will be the input without any vowels, which is Hll Wrld. References:

[LPI Exam 101 Detailed Objectives], Topic 103: GNU and Unix Commands, Objective 103.7: Perform basic file management, Weight: 4, Key Knowledge Areas: Use of tr to perform basic text transformations.

[LPI Linux Essentials Certification All-in-One Exam Guide], Chapter 5: Working with Files, Page 165, Using the tr Command.

 The RPM command that will output the name of the package which supplied the file /etc/exports is rpm -qf /etc/exports. This command will query the RPM database and find the package that owns or provides the file /etc/exports1. The output will show the package name, version, release, and architecture. For example:

The other options are incorrect for the following reasons:

rpm -F /etc/exports. This command will try to freshen or upgrade the package that contains the file /etc/exports, if it is already installed2. This command will not output the package name, but rather install the latest version of the package from a specified source. For example:

rpm -Kl /etc/exports. This command is not valid, as RPM does not have a -Kl option. The -K option is used to verify the signatures of the RPM package files, not the installed files3. The -l option is used to list the files in a package, not to query the package name. For example:

rpm -qp /etc/exports. This command will try to query the package information of the file /etc/exports, as if it was an RPM package file. This command will not output the package name, but rather an error message, as /etc/exports is not a valid RPM package file. For example:

rpm -qi /etc/exports. This command will try to query the information of the package /etc/exports, as if it was an installed package name. This command will not output the package name, but rather an error message, as /etc/exports is not a valid package name. For example:

 Running a command in the background of your shell means that the command will execute asynchronously, without blocking the shell prompt or waiting for user input. This can be useful for commands that take a long time to complete, or that do not require user interaction. One of the valid reasons to run a command in the background is when the command has to run immediately but the user needs to log out. For example, if the user wants to start a backup process that will take several hours, but also wants to close the terminal session and log out from the system, they can run the backup command in the background by appending an ampersand (&) to the command line. This way, the backup command will continue to run even after the user logs out, and the user can check the status or output of the command later. The other options are either incorrect or not applicable. Running a command in the background does not affect the execution priority of the command, which is determined by the nice value and the scheduler. Running a command in the background does not delay the execution of the command, which will start as soon as possible. Running a command in the background does not guarantee that the command will survive a system shutdown or reboot, unless the command is configured to do so with a service manager or a startup script. References:

LPIC-1 Exam 101 Objectives, Topic 103: GNU and Unix Commands, 103.1 Work on the command line

LPIC-1 Linux Administrator 101-500 Exam FAQ, LPIC-1 Exam 101 Objectives, GNU and Unix Commands (Total Weight: 25)

To save a file and exit the vi/vim editor, you need to switch to command mode by pressing the Esc key, then type a colon (:) followed by a command. There are two commands that can save a file and quit the editor: x and wq. The x command writes the buffer to the file only if there are unsaved changes, while the wq command always writes the buffer to the file and updates the file modification time. Both commands are followed by an exclamation mark (!) to force the operation and override any warnings. Therefore, the correct sequences are:

Esc ZZ: This is equivalent to typing :x and hitting Enter.

Esc :wq!: This writes the buffer to the file and quits the editor, ignoring any warnings.

The other options are incorrect because:

Ctrl :w! is not a valid sequence. The Ctrl key does not switch to command mode, and the w command only saves the file without exiting.

Esc zz is not a valid sequence. The zz command does not exist in vi/vim.

Ctrl XX is not a valid sequence. The Ctrl key does not switch to command mode, and the XX command does not exist in vi/vim.

The bg command is used to resume a suspended command in the background, allowing it to run without user interaction. The command takes a job ID as an argument, which can be obtained by using the jobs command. Alternatively, if no job ID is specified, bg will resume the most recently suspended job. The bg command is part of the job control features of the Linux shell, which allow users to manage multiple processes running in the same terminal. References:

LPI Linux Essentials: 1.3.2 Job Control

LPI Linux Administrator: 103.1 Work on the command line

The vi command is a text editor that operates in two modes: command mode and insert mode. Command mode is used to enter commands to manipulate the text, such as saving, quitting, copying, pasting, etc. Insert mode is used to enter text into the file. When the vi command is invoked without any additional parameters, it starts in command mode and opens a new empty file. To enter text, the user has to press i to switch to insert mode. To return to command mode, the user has to press Esc. To save and quit, the user has to enter :wq in command mode. The other options are either incorrect or not applicable. The vi command does not load the last file used or the content of the vi buffer by default. It also does not require the user to explicitly create or load a file. It does not exit with an error message unless there is a problem with the terminal or the system. References:

LPIC-1 Exam 101 Objectives, Topic 103: GNU and Unix Commands, 103.7 Use and edit text files

LPIC-1 Linux Administrator 101-500 Exam FAQ, LPIC-1 Exam 101 Objectives, GNU and Unix Commands (Total Weight: 25)

The :e command in vi is used to edit a file. If the file name is not specified, it will edit the current file. If the file has been changed by another process, the :e command will reload the file with the new content, discarding any unsaved changes made in vi. Therefore, the :e command can be used to reopen the file for editing with the new content without exiting vi. The other options are either invalid or do not perform the desired task. The :r command is used to read the content of another file or command and insert it into the current file. The :n command is used to edit the next file in the argument list, if any. The :w command is used to write the current file to disk, optionally with a new name. References:

LPIC-1 Exam 101 Objectives, Topic 103: GNU and Unix Commands, 103.7 Use and edit text files

LPIC-1 Linux Administrator 101-500 Exam FAQ, LPIC-1 Exam 101 Objectives, GNU and Unix Commands (Total Weight: 25)