Authentic CompTIA Certification Exam N10-009 Questions Answers

If the company’s SSID is not visible in some areas while other networks are still visible, the most likely cause is insufficient wireless coverage. The wireless signal does not reach those areas, meaning additional access points or signal boosters may be required.

Breakdown of Options:

A. Interference or channel overlap – Would cause slow or unstable connections, but the SSID should still be visible.

B. Insufficient wireless coverage – ✅ Correct answer. If the SSID is not appearing, the signal is too weak in that area.

C. Roaming misconfiguration – Would cause devices to stay on weaker APs instead of switching, but the SSID should still be visible.

D. Client disassociation issues – This would disconnect users, but they should still see the network.

Private VLANs (PVLANs) are used to segment devices on the same subnet and switch so they cannot communicate with each other, while still accessing a shared resource like a router or gateway. This is often used in shared hosting or DMZ environments.

A. ACLs (Access Control Lists) control traffic between networks, not within the same VLAN.

B. Trunking carries multiple VLANs between switches but does not isolate devices.

C. Port security limits MAC addresses per port but doesn’t isolate communication between ports.

???? Reference:

CompTIA Network+ N10-009 Official Objectives: 3.4 – Compare and contrast access control methods.

The CompTIA Troubleshooting Methodology states that after testing the theory, the next step is to establish a plan of action to resolve the issue.

Troubleshooting Steps:

Identify the problem.

Establish a theory of probable cause.

Test the theory to determine the cause.

Establish a plan of action and implement the solution. ✅ (Correct step)

Verify full system functionality.

Document findings, actions, and outcomes.

Breakdown of Options:

A. Verify full system functionality – Happens after implementing the solution.

B. Document the findings and outcomes – Final step, happens after resolving the issue.

C. Establish a plan of action – ✅ Correct answer. Comes immediately after confirming the cause.

D. Identify the problem – First step, already completed.