Weekend Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: bigdisc65

ANS-C01 Exam Dumps - Amazon Web Services AWS Certified Specialty Questions and Answers

Question # 4

A company has developed a new web application on AWS. The application runs on Amazon Elastic Container Service (Amazon ECS) on AWS Fargate behind an Application Load Balancer (ALB) in the us-east-1 Region. The application uses Amazon Route 53 to host the DNS records for the domain. The content that is served from the website is mostly static images and files that are not updated frequently. Most of the traffic to the website from end users will originate from the United States. Some traffic will originate from Canada and Europe.

A network engineer needs to design a solution that will reduce latency for end users at the lowest cost. The solution also must ensure that all traffic is encrypted in transit until the traffic reaches the ALB.

Which solution will meet these requirements?

Options:

A.

Configure the ALB to use an AWS Global Accelerator accelerator In us-east-1. Create a secure HTTPS listener. Create an alias record in Amazon Route 53 for the custom domain name. Configure the alias record to route to the DNS name that is assigned to the accelerator for the ALB.

B.

Configure the ALB to use a secure HTTPS listener Create an Amazon CloudFront distribution. Set the origin domain name to point to the DNS record that is assigned to the ALB. Configure the CloudFront distribution to use an SSL certificate. Set all behaviors to force HTTPS. Create an alias record in Amazon Route 53 for the custom domain name. Configure the alias record to route to the DNS name that is assigned to the ALB.

C.

Configure the ALB to use a secure HTTPS listener. Create an Amazon CloudFront distribution. Set the origin domain name to point to the DNS record that is assigned to the ALB. Configure the CloudFront distribution to use an SSL certificate and redirect HTTP to HTTPS. Create an alias record in Amazon Route 53 for the custom domain name. Configure the alias record to route to the CloudFront distribution.

D.

Configure the ALB to use an AWS Global Accelerator accelerator in us-east-1. Create a secure HTTPS listener. Create a second application stack on Amazon ECS on Fargate in the eu-west-1 Region Create another secure HTTPS listener. Create an alias record inAmazon Route 53 for the custom domain name. Configure the alias record to use a latency-based routing policy to route to the DNS name that is assigned to the accelerator for the ALBs.

Buy Now
Question # 5

A customer has set up multiple VPCs for Dev, Test, Prod, and Management. You need to set up AWS Direct Connect to enable data flow from on-premises to each VPC. The customer has monitoring software running in the Management VPC that collects metrics from the instances in all the other VPCs. Due to budget requirements, data transfer charges should be kept at minimum.

Which design should be recommended?

Options:

A.

Create a total of four private VIFs, one for each VPC owned by the customer, and route traffic between VPCs using the Direct Connect link.

B.

Create a private VIF to the Management VPC, and peer this VPC to all other VPCs.

C.

Create a private VIF to the Management VPC, and peer this VPC to all other VPCs, enable source/destination NAT in the Management VPC.

D.

Create a total of four private VIFs, and enable VPC peering between all VPCs.

Buy Now
Question # 6

A company has a VPC that hosts Amazon EC2 instances in a private subnet. The EC2 Instances use a NAT gateway and an internet gateway for internet connectivity to retrieve data from specific internet websites. The company wants to use AWS Network Firewall to filter outbound traffic.

What should a network engineer do to meet these requirements?

Options:

A.

1. Create a firewall in the NAT gateway subnet.

2. Configure the EC2 instance subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the NAT gateway.

3. Configure the NAT gateway subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the firewall endpoint.

4. Configure the firewall subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the internet gateway.

B.

1. Create a firewall in a new subnet.

2. Configure the EC2 instance subnet route tables to direct traffic with a destination of0.0.0.0/0 to the firewall endpoint.

3. Configure the firewall subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the NAT gateway.

4. Configure the NAT gateway subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the internet gateway.

C.

1. Create a firewall in the subnet of the EC2 instances.

2. Configure the EC2 instance subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the firewall endpoint.

3. Configure the firewall subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the NAT gateway.

4. Configure the NAT gateway subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the internet gateway.

D.

1. Create a firewall in a new subnet.

2. Configure the EC2 instance subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the NAT gateway.

3. Configure the NAT gateway subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the firewall endpoint.

4. Configure the firewall subnet route tables to direct traffic with a destination of 0.0.0.0/0 to the internet gateway.

Buy Now
Question # 7

A company uses Amazon Route 53 to register a public domain, example.com, in an AWS account. A central services group manages the account. The company wants to create a subdomain, test.example.com, in another AWS account to offer name services for Amazon EC2 instances that are hosted in the account. The company does not want to migrate the parent domain to the subdomain account.

A network engineer creates a new Route 53 hosted zone for the subdomain in the second account.

Which combination of steps must the network engineer take to complete the task? (Choose two.)

Options:

A.

Add records for the hosts of the new subdomain to the new Route 53 hosted zone.

B.

Update the DNS service for the parent domain by adding name server (NS) records for the subdomain.

C.

Update the DNS service for the subdomain by adding name server (NS) records for theparent domain.

D.

Create an alias record from the parent domain that points to the hosted zone for the subdomain in the second account.

E.

Add a start of authority (SOA) record in the parent domain for the subdomain.

Buy Now
Question # 8

A company’s data center is connected to a single AWS Region by an AWS Direct Connect dedicated connection. The company has a single VPC in the Region. The company stores logs for all its applications locally in the data center.

The company must keep all application logs for 7 years. The company decides to copy all application logs to an Amazon S3 bucket.

Which solution will meet these requirements?

Options:

A.

Create a public VIF on the Direct Connect connection. Create an Amazon S3 gateway endpoint in the VPC.

B.

Create a private VIF on the Direct Connect connection. Create an Amazon S3 gateway endpoint in the VPC.

C.

Create a private VIF on the Direct Connect connection. Create an Amazon S3 interface endpoint in the VPC.

D.

Create a public VIF on the Direct Connect connection. Create an Amazon S3 interface endpoint in the VPC.

Buy Now
Question # 9

A company has hundreds of Amazon EC2 instances that are running in two production VPCs across all Availability Zones in the us-east-1 Region. The production VPCs are named

VPC A and VPC B.

A new security regulation requires all traffic between production VPCs to be inspected before the traffic is routed to its final destination. The company deploys a new shared VPC that

contains a stateful firewall appliance and a transit gateway with a VPC attachment across all VPCs to route traffic between VPC A and VPC B through the firewall appliance for

inspection. During testing, the company notices that the transit gateway is dropping the traffic whenever the traffic is between two Availability Zones.

What should a network engineer do to fix this issue with the LEAST management overhead?

Options:

A.

In the shared VPC, replace the VPC attachment with a VPN attachment. Create a VPN tunnel between the transit gateway and the firewall appliance. Configure BGP.

B.

Enable transit gateway appliance mode on the VPC attachment in VPC A and VPC B.

C.

Enable transit gateway appliance mode on the VPC attachment in the shared VPC.

D.

In the shared VPC, configure one VPC peering connection to VPC A and another VPC peering connection to VPC B.

Buy Now
Question # 10

A software company offers a software-as-a-service (SaaS) accounting application that is hosted in the AWS Cloud The application requires connectivity to the company's on-premises network. The company has two redundant 10 GB AWS Direct Connect connections between AWS and its on-premises network to accommodate the growing demand for the application.

The company already has encryption between its on-premises network and the colocation. The company needs to encrypt traffic between AWS and the edge routers in the colocation within the next few months. The company must maintain its current bandwidth.

What should a network engineer do to meet these requirements with the LEAST operational overhead?

Options:

A.

Deploy a new public VIF with encryption on the existing Direct Connect connections. Reroute traffic through the new public VIF.

B.

Create a virtual private gateway Deploy new AWS Site-to-Site VPN connections from on premises to the virtual private gateway Reroute traffic from the Direct Connect private VIF to the new VPNs.

C.

Deploy a new pair of 10 GB Direct Connect connections with MACsec. Configure MACsec on the edge routers. Reroute traffic to the new Direct Connect connections. Decommission the original Direct Connect connections

D.

Deploy a new pair of 10 GB Direct Connect connections with MACsec. Deploy a new public VIF on the new Direct Connect connections. Deploy two AWS Site-to-Site VPN connections on top of the new public VIF. Reroute traffic from the existing private VIF to the new Site-to-Site connections. Decommission the original Direct Connect connections.

Buy Now
Question # 11

A company recently started using AWS Client VPN to give its remote users the ability to access resources in multiple peered VPCs and resources in the company's on-premises data center. The Client VPN endpoint route table has a single entry of 0.0.0.0/0. The Client VPN endpoint is using a new security group that has no inbound rules and a single outbound rule that allows all traffic to 0.0.0.0/0.

Multiple users report that web search results are showing remote incorrect geographic location information for the users.

Which combination of steps should a network engineer take to resolve this issue with the LEAST amount of service interruption? (Choose three.)

Options:

A.

Switch users to AWS Site-to-Site VPNs.

B.

Enable the split-tunnel option on the Client VPN endpoint.

C.

Add routes for the peered VPCs and for the on-premises data center to the Client VPN route table.

D.

Remove the 0.0.0.0/0 outbound rule from the security group that the Client VPN endpoint uses.

E.

Delete and recreate the Client VPN endpoint in a different VPC.

F.

Remove the 0.0.0.0/0 entry from the Client VPN endpoint route table.

Buy Now
Question # 12

A media company is implementing a news website for a global audience. The website uses Amazon CloudFront as its content delivery network. The backend runs on Amazon EC2 Windows instances behind an Application Load Balancer (ALB). The instances are part of an Auto Scaling group. The company's customers access the website by using service example com as the CloudFront custom domain name. The CloudFront origin points to an ALB that uses service-alb.example.com as the domain name.

The company’s security policy requires the traffic to be encrypted in transit at all times between the users and the backend.

Which combination of changes must the company make to meet this security requirement? (Choose three.)

Options:

A.

Create a self-signed certificate for service.example.com. Import the certificate into AWS Certificate Manager (ACM). Configure CloudFront to use this imported SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.

B.

Create a certificate for service.example.com by using AWS Certificate Manager (ACM). Configure CloudFront to use this custom SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.

C.

Create a certificate with any domain name by using AWS Certificate Manager (ACM) for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.

D.

Create a public certificate from a third-party certificate provider with any domain name for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.

E.

Create a certificate for service-alb.example.com by using AWS Certificate Manager (ACM). Onthe ALB add a new HTTPS listener that uses the new target group and the service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the ALB.

F.

Create a self-signed certificate for service-alb.example.com. Import the certificate into AWS Certificate Manager (ACM). On the ALB add a new HTTPS listener that uses the new target group and the imported service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the ALB.

Buy Now
Question # 13

A network engineer has deployed an Amazon EC2 instance in a private subnet in a VPC. The VPC has no public subnet. The EC2 instance hosts application code that sends messages to an Amazon Simple Queue Service (Amazon SQS) queue. The subnet has the default network ACL with no modification applied. The EC2 instance has the default security group with no modification applied.

The SQS queue is not receiving messages.

Which of the following are possible causes of this problem? (Choose two.)

Options:

A.

The EC2 instance is not attached to an IAM role that allows write operations to Amazon SQS.

B.

The security group is blocking traffic to the IP address range used by Amazon SQS

C.

There is no interface VPC endpoint configured for Amazon SQS

D.

The network ACL is blocking return traffic from Amazon SQS

E.

There is no route configured in the subnet route table for the IP address range used by Amazon SQS

Buy Now
Exam Code: ANS-C01
Exam Name: Amazon AWS Certified Advanced Networking - Specialty
Last Update: Jun 15, 2025
Questions: 288
ANS-C01 pdf

ANS-C01 PDF

$29.75  $84.99
ANS-C01 Engine

ANS-C01 Testing Engine

$33.25  $94.99
ANS-C01 PDF + Engine

ANS-C01 PDF + Testing Engine

$47.25  $134.99