H12-821_V1.0 Exam Dumps - Huawei HCIP-Datacom Questions and Answers

IS-IS uses a two-level hierarchy:

Level-1 routers operate within a single area and cannot exchange routing information with routers in other areas directly.

To reach external areas (the IS-IS backbone or other areas), Level-1 routers rely on Level-1-2 routers, which perform inter-area route redistribution.

Therefore, a Level-1 router must use a Level-1-2 router as a gateway to reach destinations outside its own area.

 Transitive vs. Non-Transitive Attributes

The Community attribute is a transitive optional attribute, meaning that if a router receives a route with this attribute and does not understand its purpose, the router retains and propagates it to other peers.

Other options, such as AS_Path and MED, are well-defined mandatory or optional attributes with specific purposes.

 HCIP-Datacom-Core Reference

The behavior of optional transitive attributes is detailed in the BGP protocol and attribute chapters​​.

Option A is false. When advertising a route to an IBGP peer, the BGP speaker does not modify the AS_Path. It simply advertises the route as-is, preserving the AS_Path learned from EBGP.

Clarification of the options:

B is correct: When a route is sent to an EBGP peer, the local AS is prepended to the AS_Path.

C is correct: The AS_Path begins with the local AS when a new route is advertised to an EBGP neighbor.

D is correct: IBGP does not modify AS_Path when passing routes within the same AS.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“BGP speakers prepend their AS number to the AS_Path only when advertising to EBGP peers. IBGP peers do not alter the AS_Path.”

(Chapter: BGP Path Attributes – Section: AS_Path)

A is true – MAC authentication often uses PAP or CHAP for basic password exchange.

B is false – By default, both the username and password are set to the full MAC address of the terminal, not just the last 6 digits.

C is true – MAC authentication is transparent to the user and requires no client software on the terminal.

D is true – The authentication system includes:

Terminal (user device),

Access device (AP or switch), and

Authentication server (e.g., RADIUS).

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“MAC authentication does not require client-side software. By default, both the user name and password are the complete MAC address in lowercase without delimiters.”

(Chapter: WLAN Security – Section: MAC Authentication Mechanism)

The filter-policy command in IS-IS is used to control the advertisement and filtering of routing information. However, it does not directly filter LSPs (Link State Packets); instead, it controls route advertisements. The false statement here is that it filters LSPs ​.

Edge ports are used in RSTP to bypass the spanning tree calculation for ports connected to end devices. By configuring ports like SWD's GE0/0/2 and SWC's GE0/0/2 as edge ports, they transition directly to the Forwarding state upon activation, ensuring faster convergence. Statement A is incorrect because receiving BPDU invalidates the edge port status ​.

 R3, as the DIS in the Level-2 domain, periodically sends Complete Sequence Number Protocol Data Units (CSNPs) to ensure LSDB synchronization among Level-2 routers.

 R1 and R2 are in a Level-1 domain, and IS-IS requires the receiving router (R2) to acknowledge an LSP from R1 by sending a Partial Sequence Number Protocol Data Unit (PSNP).

 IS-IS LSPs in a broadcast network are sent using multicast, not unicast, making option C incorrect.

 For Level-2 LSPs, acknowledgments are not provided using PSNP by R3; CSNPs are sufficient for synchronization ​.

The output shows that the router with the IP 10.0.12.2 is the Backup Designated Router (BDR), as indicated in the State: BDR field. The router ID is 10.0.2.2, the interface cost is 1, and the IP address of the interface is 10.0.12.2. Hence, C is the correct answer ​.