H12-841_V1.5 Exam Dumps - Huawei HCIP-Datacom Questions and Answers

In Huawei’s free mobility solution based on iMaster NCE-Campus, the method used for obtaining IP-security group entries depends on whether the device acts as an authentication point, a policy enforcement point, or both. When a devicefunctions as both an authentication point and a policy enforcement point, it can directly obtain user identity information during the authentication process.

According to HCIP Datacom Campus Network documentation, when authentication occurs on a device, that device locally learns user identity attributes such as IP address, security group, and access policy. In this scenario, the device doesnot need to subscribeto IP-security group entries from iMaster NCE-Campus in order to view or use user information. iMaster NCE-Campus proactively delivers relevant policy and security group information to the device as part of centralized control and coordination.

IP-security group entrysubscriptionis required only when the policy enforcement point isnotthe authentication point. In that case, the enforcement device must subscribe to IP-security group entries or receive them from the authentication device to correctly enforce policies.

Because the device in this scenario performs both authentication and enforcement roles, user information is directly available without subscription. Therefore, the statement claiming that administrators must subscribe to IP-security group entries to view user information is incorrect.

Hence, the correct answer isFALSE, which aligns with Huawei free mobility operational principles defined in HCIP Datacom Campus Network materials.

According to HCIP Datacom Campus Network architecture principles, campus networks can be classified from multiple dimensions to support scientific planning, design, and deployment. These classification methods help network designers select appropriate architectures, devices, and technologies based on actual service requirements.

Network scaleis a primary classification dimension. Campus networks are commonly divided into small, medium, and large-scale networks based on the number of users, terminals, access points, and network devices. This classification directly influences topology design, such as whether a simple two-layer architecture or a more scalable three-layer architecture is required.

Served objectsis another important classification method. Campus networks may serve office users, guests, teaching staff, students, production terminals, IoT devices, or video surveillance systems. Different served objects have different requirements for bandwidth, security, and access control, making this dimension critical for policy and service design.

Access moderefers to how users and devices connect to the campus network, including wired access, wireless access, or a hybrid of both. This classification impacts WLAN planning, authentication methods, and network access control strategies.

Service complexityreflects the types and number of services carried by the network. A campus network may provide basic data services or support complex services such as voice, video, cloud access, and industry applications. Higher service complexity requires more advanced network design and management capabilities.

Therefore, all listed options are valid classification methods for campus networks.

Comprehensive and Detailed 200 to 250 words of Explanation From HCIP Datacom Campus Network documents knowledge without any URL or Links:

Huawei campus switches support multiple flexible VLAN assignment methods to meet diverse access control and service deployment requirements. The most basic method isinterface-based VLAN assignment, where a physical or logical port is statically assigned to a specific VLAN. This method is simple and widely used in traditional access layer designs.

Huawei switches also supportMAC address–based VLAN assignment, allowing devices to be dynamically placed into VLANs based on their MAC addresses. This is useful in scenarios where users frequently move between access ports but require consistent VLAN membership.

Protocol-based VLAN assignmentenables traffic to be classified into VLANs based on upper-layer protocol types, which can be useful in special service separation scenarios. Additionally,IP subnet–based VLAN assignmentallows switches to assign VLANs according to the source IP address of packets, enabling logical grouping of users based on network layer addressing rather than physical location.

These VLAN assignment mechanisms enhance network flexibility, simplify user mobility, and improve access-layer service management. According to HCIP Datacom Campus Network documentation, Huawei switches indeed support VLAN assignment based on interface, MAC address, protocol, and IP address. Therefore, the statement is TRUE, and option A is correct.

SNMP and NETCONF are both commonly used network management protocols in campus networks, but they differ significantly in architecture, capabilities, and configuration management mechanisms. According to HCIP Datacom Campus Network documentation,NETCONF is designed for modern, model-driven network management, while SNMP is mainly used for monitoring and simple management.

Option A is incorrect because although both protocols use a client/server model, their roles are different. In SNMP, the managed device operates as an SNMP agent (server), while the NMS acts as the client. In NETCONF, the network device functions as the NETCONF server, and the management system is the client, not the other way around.

Option B is also incorrect because SNMP manages data using MIBs, whereas NETCONF usesdata models, typically based on YANG, instead of MIBs.

Option D is incorrect because SNMP does not support multiple configuration databases. It mainly provides basic read and write operations and is not suitable for complex configuration management or rollback.

Option C is correct. NETCONF provides alocking mechanismthat allows a client to lock a configuration datastore during configuration changes. This prevents multiple users or systems from modifying the same configuration simultaneously, avoiding conflicts and ensuring configuration consistency. This capability is a key advantage of NETCONF in intelligent campus network management and aligns with HCIP Datacom Campus Network best practices.

In the Huawei SD-WAN Interconnection Solution,enhanced BGP EVPNis used as the core control-plane technology to distribute not only traditional routing information but also SD-WAN–specific service and tunnel-related data. This enhancement allows centralized control and automated service deployment across branch and hub sites.

TNP routesare one of the key information types transmitted through enhanced BGP EVPN. TNP (Transport Network Plane) routes describe the reachability of transport tunnels between SD-WAN nodes and are essential for establishing and maintaining overlay connectivity across different transport networks such as Internet, MPLS, or LTE.

IPsec SA (Security Association) informationis also carried through enhanced BGP EVPN. This allows SD-WAN devices to dynamically establish secure IPsec tunnels without manual configuration, ensuring encrypted communication between sites while supporting fast deployment and scalability.

In addition,service routesare distributed using enhanced BGP EVPN. Service routes identify application or service-level reachability and enable intelligent traffic steering, policy-based forwarding, and service chaining across the SD-WAN fabric.

GRE configuration, however, is not transmitted through enhanced BGP EVPN. GRE parameters are typically configured locally and do not belong to the control information exchanged by EVPN in the Huawei SD-WAN solution. Therefore, the correct information types are TNP routes, IPsec SA information, and service routes.

In BGP EVPN-based VXLAN networks, route advertisement follows clearly defined standards regarding how endpoint and tunnel information is carried. According to HCIP Datacom Campus Network documentation,BGP EVPN does not use an EVPN Router MAC Extended Community to advertise the Router MAC of a VTEP. This statement is therefore incorrect.

In EVPN, different route types serve specific purposes. For example,EVPN Route Type 2 (MAC/IP Advertisement routes)are used to advertise MAC addresses (and optionally IP addresses) of endpoints. These routes associate endpoint information with a VTEP by using theBGP next-hop attribute, which contains the VTEP IP address. Similarly,EVPN Route Type 3 (Inclusive Multicast Ethernet Tag routes)also relies on the BGP next hop to identify the VTEP for VXLAN tunnel establishment and BUM traffic forwarding.

The Router MAC of a VTEP is alocal forwarding attribute, primarily used during VXLAN encapsulation and decapsulation on the device itself. It is not distributed through EVPN extended communities. While EVPN does define several extended communities for control and policy purposes, there is no standard or HCIP-defined “EVPN Router MAC Extended Community” used to carry the Router MAC field of a VTEP during route advertisement.

Therefore, based on HCIP Datacom Campus Network VXLAN EVPN principles, the statement is false.

Comprehensive and Detailed 200 to 250 words of Explanation From HCIP Datacom Campus Network documents knowledge without any URL or Links:

In Huawei iMaster NCE-Campus and CloudCampus management systems, different log types are designed to record different categories of events to support auditing, troubleshooting, and security analysis. When anMSP administrator creates a tenant account, this action is considered amanagement operationperformed through the system’s management interface.

Such administrative actions are recorded in theOperation Log. Operation logs documentuser-initiated configuration and management activities, including tenant creation, modification, deletion, policy changes, and administrative actions performed by operators or administrators. These logs are essential for operation auditing and responsibility tracing in multi-tenant environments.

System logsmainly record internal system events, such as service startup, module status changes, or system exceptions, and do not track administrator operations.Security logsfocus on security-related events, such as login failures, abnormal access attempts, or permission violations, rather than routine administrative operations.Device channel logsrecord communication events between devices and controllers, such as device registration or channel status changes, and are unrelated to tenant management actions.

According to HCIP Datacom Campus Network and CloudCampus O&M documentation, tenant account creation performed by an MSP administrator is clearly categorized as anoperation behavior, and therefore it is recorded in theOperation Log.

In Huawei campus network solutions,free mobilityis a user-centric access control mechanism designed to decouple network policies from physical locations and traditional network identifiers. According to HCIP Datacom Campus Network documentation, free mobility doesnotrely on VLAN IDs or IP addresses as the basis for policy management and permission control. Instead, it is implemented based onuser identity, such as user accounts, roles, user groups, or device identities.

Traditional networks often bind security policies to VLANs or IP subnets, which means users receive different permissions when they move to different access points or switch ports. This approach lacks flexibility and increases configuration complexity. Free mobility solves this problem by using centralized authentication and authorization mechanisms, such as 802.1X or MAC authentication combined with AAA, to dynamically assign policies after user authentication.

Once a user is authenticated, the network enforces access permissions based on predefined user roles or groups, regardless of where the user connects to the network. Even if the user’s IP address or VLAN changes due to roaming, the same security policy is consistently applied. This ensures seamless access experience, simplifies network management, and enhances security control.

Because free mobility isidentity-based rather than VLAN- or IP-based, the statement claiming that it implements policy management and permission control based on users' VLAN IDs and IP addresses is incorrect. Therefore, the correct answer isFALSE.

DHCP is a core protocol used in campus networks to automatically assign IP addresses and deliver network parameters to hosts, improving deployment efficiency and simplifying address management. DHCP messages include several fixed fields and anOptions field, which plays a critical role in parameter delivery.

Option A isfalse. Even if only gateway and DNS server information needs to be delivered to a client, the DHCP Offer messagemust carry the Options field. Default gateway and DNS server information are delivered through specific DHCP options, such as Option 3 (Router) and Option 6 (DNS Server). Without the Options field, these parameters cannot be conveyed to the client.

Option B is correct. The Options field in DHCP messages uses aTLV (Type-Length-Value)format, allowing flexible extension and supporting various network parameters, including NTP server addresses, wireless AC addresses, and log server addresses, which aligns with HCIP Datacom Campus Network descriptions.

Option C is also correct. DHCP supportsstatic IP address allocationby binding a specific IP address to a client’s MAC address. This is commonly used for printers, servers, or network devices that require fixed IP addresses.

Option D is correct as well. Because DHCP uses broadcast messages that cannot cross Layer 3 boundaries, aDHCP relay agentis required when the client and server reside on different IP networks.

Therefore, option A is the only incorrect statement.

In HCIP Datacom Campus Network security design,port securityis used to limit the number of MAC addresses that can be learned on an access interface, preventing unauthorized device access and MAC address spoofing. When the number of learned MAC addresses reaches the configured upper limit, the switch behavior depends on the configuredviolation mode.

One possible action isshutdown mode, where the switch sets the interface to an error-down state and generates an alarm. This corresponds to option A. The interface must be manually or automatically recovered before normal communication can resume. This mode provides the highest level of security and clear fault notification.

Another supported behavior isprotect mode, in which the switch silently discards packets from unknown source MAC addresses after the limit is reached. No alarms are generated in this case, which matches option C. This mode minimizes network disruption while still blocking unauthorized devices.

Therestrict modeis also supported. In this mode, the switch discards packets with unknown source MAC addresses and generates an alarm or log entry, corresponding to option D. This allows administrators to detect violations without shutting down the interface.

Option B is incorrect because when an interface enters the error-down state due to a port security violation, an alarm or log notification is always generated according to HCIP Datacom Campus Network behavior. Therefore, the valid actions are A, C, and D.