H13-624_V5.5 Exam Dumps - Huawei HCIP-Storage Questions and Answers

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* details the low-level design (LLD) mode for Huawei scale-out storage: “In LLD mode, the Storage Deployment Tool (SDT) is used to plan nodes, networks, and clusters, generating a configuration file that guides subsequent installation and deployment.” The SDT ensures precise configuration for complex deployments, making it the correct tool for this task.

The software installation process for Huawei OceanStor Pacific scale-out storage systems is detailed in the *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)*. Let’s evaluate each option:

- Option A: True. The material states: “For block service installation with converged compute and storage nodes, each node requires at least 20 vCPUs to support management and data processing tasks.”

- Option B: True. The material confirms: “In converged deployments, the disk quantity difference between any two nodes in a storage pool must not exceed 2 or 30% of the disk count on the node with the most disks to ensure balanced performance.”

- Option C: False. The material explains: “Wizard-based software installation automates node addition, network configuration, and control cluster creation via DeviceManager, reducing manual steps. Engineers do not need to perform these tasks manually before installing the OceanStor Pacific software.” This makes the statement incorrect.

- Option D: True. The material notes: “DPC installation requires a minimum of 20 GB of memory on compute nodes to ensure stable operation.”

Thus, option C is false.

The valid write bandwidth calculation for Huawei flash storage accounts for data disks in a RAID configuration. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* explains: “The valid write bandwidth of disks is calculated as the write bandwidth of a single disk multiplied by the number of disks, adjusted by the ratio of data disks to total disks to account for RAID overhead (e.g., parity disks). The formula is: Valid write bandwidth = Write bandwidth of a single disk × Number of disks × (Number of data disks / Total number of disks).” Let’s evaluate:

- Option A: Incorrect. This formula is for read bandwidth and uses system disks, not data disks.

- Option B: Incorrect. It does not account for RAID overhead, which reduces effective bandwidth.

- Option C: Correct. Matches the documented formula for valid write bandwidth.

- Option D: Incorrect. Port bandwidth is unrelated to disk write bandwidth calculations.

Thus, option C is correct.

The Distributed Parallel Client (DPC) in Huawei OceanStor Pacific systems enables parallel file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “When adding DPC nodes, engineers can manually add nodes using DeviceManager by entering the management IP address of the node, not the service IP address. The management IP is used to establish control plane communication for node integration.” The service IP address is used for data access by clients, not for node creation or management tasks. Therefore, the statement that the engineer can add a node using the service IP address is false.

Huawei describes CPU core grouping and intelligent scheduling as improving processing performance by using core grouping and task partitioning, which aligns with resource isolation and lower latency , not cache prefetch across all LUNs.