Black Friday Mega Drop - Up to 75% Off Best Sellers - Ends in 0d 00h 00m 00s - Coupon code: certbig75

HPE7-A10 Exam Dumps - HP Aruba Certified Switching Expert Questions and Answers

Question # 4

Refer to the exhibit.

Device Insight Integration:

* Device Insight Integration: Enable

* Registration Token: 4ROAMDMNKLG

* Registration Status: Registered

* Master ClearPass Server: cp1.acnsxtest.com (10.38.1.113)

* Polling Interval: 15 minutes

Device Tag Updates Action:

* Tags Update Action: Apply action for selected Tag updates only

* Selected Tags for Action: `suspicious`

* RADIUS Action: `[AOS-CX - Disconnect]`

HPE Aruba Networking ClearPass Policy Manager (CPPM) uses the settings displayed in the exhibit. You use the tag shown in the exhibit in enforcement policies associated with several NAS types, including HPE Aruba Networking APs, HPE Aruba Networking gateways, and AOS-CX switches.

What should you do to ensure clients are reclassified and receive the proper treatment based on the tag?

Options:

A.

Set the Tags Update Action to No Action. Then instead enable the RADIUS CoAs using enforcement profiles in the rules that match clients with the tag shown in the exhibit.

B.

Change the RADIUS action to [Aruba Wireless - Bounce Switch Port] which is supported by all the NASes in question.

C.

Enable profiling in each service using one of these enforcement profiles. Set the profiling action to the correct one for the NASes using that service.

D.

Change the RADIUS action to [Aruba Wireless - Terminate Session] which is supported by all the NASes in question.

Buy Now
Question # 5

A company has HPE Aruba Networking gateways and plans to begin implementing gateway IDS/IPS. The customer has chosen Block as the Fail Strategy.

What could you recommend to help reduce unexpected outages caused by this particular fail strategy?

Options:

A.

Enabling alerts and email notifications for events related to gateway IPS engine utilization and errors

B.

Setting the IDS or IPS policy to the least restrictive option, Lenient

C.

Making sure that the gateways have formed a cluster and operate in default gateway mode

D.

Configuring a relatively high threshold for the gateway threat count alerts

Buy Now
Question # 6

Refer to the scenario.

You must configure HPE Aruba Networking ClearPass Onboard to issue client certificates for Azure AD-joined devices. Which step is required to accomplish this objective?

Options:

A.

Create an HTTP authentication source that references an Intune extension.

B.

Recreate the CA as a registration authority under Azure AD.

C.

Create a CPPM policy that authenticates guest users to Azure AD.

D.

Install the Intune SCEP extension on the ClearPass subscribers.

Buy Now
Question # 7

Your company uses an HPE Aruba Networking AOS-10 architecture managed by HPE Aruba Networking Central. A ClearPass Policy Manager (CPPM) cluster supplies authentication. The company also has a Palo Alto firewall. You want to configure the HPE Aruba Networking infrastructure to quarantine clients for which the firewall sends Syslog Threat messages to CPPM.

Network infrastructure devices already have a “quarantine” role configured.

You checked the CPPM event dictionary and found an entry for Palo Alto Syslog Threats that includes:

Prefix: PANW-Threat

Attributes such as syslogtimestamp and logtype

What is a correct component of the configuration in ClearPass server settings?

Options:

A.

Insight server enabled

B.

CA that signed the firewall's certificate installed as trusted

C.

Syslog scanning configured

D.

CoA delay of 5 seconds or greater

Buy Now
Question # 8

A customer’s administrators have added RF Protect licenses and enabled WIDS for an AOS-8-based solution. The customer wants to use the APs’ built-in capabilities without deploying dedicated air monitors (AMs). Administrators tested rogue-AP detection by connecting an unauthorized wireless AP to a switch, but the rogue AP was still not detected after several hours.

What is one point you should ask about?

Options:

A.

Whether admins enabled wireless containment

B.

Whether the customer is using non-standard Wi-Fi channels in the deployment

C.

Whether admins set at least one radio on each AP to air monitor mode

D.

Whether APs' switch ports support all the VLANs that are accessible at the edge

Buy Now
Question # 9

A customer has an AOS-10 architecture that includes HPE Aruba Networking APs. The customer recently enabled WIDS at the high level on the APs. Administrators see several "ad hoc using valid SSID" events.

What should you explain?

Options:

A.

A hacker could be trying to launch a man-in-the-middle or DoS attack. You will start tracking down the source of the events immediately.

B.

Domain GPOs have likely misconfigured clients. You will meet with the domain admins to work out the issue.

C.

The WIDS solution is likely malfunctioning, causing APs to detect each other as threats. You will check the configuration immediately.

D.

Faulty client drivers often cause this event. You will look out for other events, but the customer should not worry.

Buy Now
Question # 10

A customer uses an AOS-10 architecture managed by HPE Aruba Networking Central. HPE Aruba Networking infrastructure devices authenticate clients against an HPE Aruba Networking ClearPass cluster.

In HPE Aruba Networking Central, you examine network traffic flows for a wireless IoT device categorized as a "Raspberry Pi" client. You observe SSH traffic. After checking several additional wireless IoT clients, you find that they are also sending SSH traffic.

Refer to the scenario.

You need an easy way to communicate to HPE Aruba Networking ClearPass Policy Manager (CPPM) that an IoT client has used SSH.

What step should you take?

Options:

A.

On Central configure APs and gateways to use CPPM as the RADIUS accounting server.

B.

On CPPM create an Endpoint Context Server that points to the Central API.

C.

On Central set up CPPM as a Webhook application.

D.

On CPPM enable Device Insight integration.

Buy Now
Question # 11

An organization wants an AOS-CX switch to trigger an alert when its RADIUS server (cp.acnsxtest.local) rejects an unusual number of client authentication requests each hour. After discussions with other HPE Aruba Networking administrators, you still do not know how many rejections are normal or unusual. You expect the value might differ on every switch.

You are helping the developer understand how to create an NAE script for this use case.

Refer to the scenario.

The developer explains that they intend to define the rule with logic like this: `monitor > value`

However, the developer asks what value to include.

What should you recommend?

Options:

A.

Checking one of the access switches’ RADIUS statistics and adding 10 to the number listed for rejects

B.

Defining a parameter and referring to it (self.params[name]) for the value

C.

Defining a baseline and referring to it for the value

D.

Using 10 (per hour) as a good starting point for the value

Buy Now
Question # 12

You are entering the following command on an AOS-CX switch:

radius-server host clearpass.example.com tls clearpass-username clearpass-password plaintext

Which credentials should you enter for clearpass-username and clearpass-password?

Options:

A.

the credentials for a CPPM admin with HPE Aruba Networking Role Download privileges

B.

the RADIUS secret configured in the corresponding network device entry on CPPM

C.

the username in the certificate that the switch uses for Radsec and the password for the certificate’s private key

D.

the credentials of a user account used for RADIUS server tracking

Buy Now
Question # 13

A customer requires you to configure Aruba ClearPass Policy Manager (CPPM) to authenticate domain users on domain computers. Domain users, domain computers, and domain controllers obtain certificates from a Windows CA. CPPM must validate these certificates and confirm that the users and computers have accounts in Windows AD. The customer requires encrypted communication for all traffic between CPPM and the domain controllers.

You have imported the Windows CA root certificate into the ClearPass CA Trust list.

Based on these requirements, which usages should be added to it?

Options:

A.

Radsec and HPE Aruba Networking infrastructure

B.

EAP and AD/LDAP Server

C.

LDAP and HPE Aruba Networking infrastructure

D.

EAP and Radsec

Buy Now
Exam Code: HPE7-A10
Exam Name: HPE Network Security Expert Written Exam
Last Update: Nov 21, 2026
Questions: 75
HPE7-A10 pdf

HPE7-A10 PDF

$22.5  $89.99
HPE7-A10 Engine

HPE7-A10 Testing Engine

$25  $99.99
HPE7-A10 PDF + Engine

HPE7-A10 PDF + Testing Engine

$35  $139.99