350-801 Exam Dumps - Cisco CCNP Collaboration Questions and Answers

traffic classification

scheduling technique

service differentiation

queuing mechanism

platform qos trust extend cos 3

platform qos trust extend

platform qos extend trust

platform qos trust extend cos 5

Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, and it also provides load balancing.

Balanced mode provides user load balancing and user failover only for manually generated failovers. Active/standby mode provides anunconfigured standby node in the event of an outage, but it does not provide load balancing.

Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, but it does not provide load balancing.

Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage. Active/standby mode provides analways on standby node in the event of an outage, but it does not provide load balancing.

Endpoint>Expressway-C>Expressway-E>Cisco UCM

Endpoint>Expressway-E>Expressway-C> Cisco UCM

Endpoint>Expressway-E> Cisco UCM

Endpoint>Expressway-C> Cisco UCM

It improves monitoring and troubleshooting.

It determines the least cost path between sites.

It optimizes the minimum required bandwidth.

It ensures the best possible user experience

isdn incoming-voice voice

pri-group timeslots 1-24

card type t1 0 2

voice-port 0/2/0:23

Option A

Option B

Option C

Option D

Change the common phone profile.

Change the SIP dial rules.

Change the SIP profile.

Change the phone security profile.

Verify that the switch port of the phone is enabled.

Verify that the RJ-11 cable is plugged into the PC port.

Disable HSRP on the access layer switch.

Check the RJ-65 cable.

Verify that the phone's network can access the option 150 server.

Endpoints attempt to register with the bottom subscriber in the list.

Endpoints attempt to register with the top subscriber in the list.

Endpoints attempt to register with both subscribers in a load-balanced method.

If a subscriber is rebooted, endpoints deregister until the rebooted system is back in service.