Halloween Special - 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: certbig75

350-801 Exam Dumps - Cisco CCNP Collaboration Questions and Answers

Question # 4

Which configuration on Cisco UCM is required for SIP MWl to work?

Options:

A.

Assign an MWl extension on the mailbox.

B.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

C.

The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.

D.

Set the " Enable message waiting indicator " on the port group.

Buy Now
Question # 5

An administrator needs to create a partial PRI consisting of the first seven timeslots available. Which configuration snippet configures the ISDN E1 PRI for this task?

Options:

A.

B.

C.

D.

Buy Now
Question # 6

Which IP Precedence value is used to classify a call signalling packet?

Options:

A.

6

B.

5

C.

4

D.

3

Buy Now
Question # 7

Refer to the exhibit. The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?

Options:

A.

The translation rule is not matched because DNIS does not end with a " $ " .

B.

The translation rule is matched and the translated number is 02553431234.

C.

The translation rule is matched and the translated number is 025553431234.

D.

The translation rule is not matched because DNIS contains " - " .

Buy Now
Question # 8

An engineer is configuring a new administrative user in Control Hub The user must only have access to activity reports and must not be allowed any other management functions The engineer already created the user (ActUser) and navigated to Control Hub > Users > ActUser > Administrator Roles Which check box must be selected next to complete the configuration?

Options:

A.

Support admin

B.

Security activity admin

C.

Compliance officer

D.

Device admin

Buy Now
Question # 9

An engineer must deploy the Cisco Webex app to a Virtual Desktop Infrastructure (VDI) environment and support full-featured meetings. Which action must the engineer take to meet these requirements?

Options:

A.

Configure the VDI thin client and install the Webex app

B.

From Control Hub. configure VDI optimization for the Webex app

C.

Install three separate VDI plugins on the VDI thin client

D.

Install two separate VDI plugins on the VDI thin client

Buy Now
Question # 10

In Cisco UCM, an engineer at a company must configure a calling-party transformation that has these requirements

• A caller with an external phone number mask of 5555 must be matched

• After the mask is matched, the first seven digits of the company ' s caller ID 123555 must be added

• The final number to be sent must be the caller ID and the external phone number mask (123-555-5555). Drag and drop the values from the left onto the corresponding settings on the right.

Options:

Buy Now
Question # 11

Users dial a 9 before a 10-digit phone number to make an off-net call All 11 digits are sent to the Cisco Unified Border Element before going out to the PSTN The PSTN provider accepts only 10 digits. Which configuration is needed on the Cisco Unified Border Element for calls to be successful?

Options:

A.

voice translation-rule 1 rule 1 /^9/ //

B.

voice translation-rule 1 rule 1 /^9(..........)/ //

C.

voice translation-rule 1 rule 1 /^9.+/ //

D.

voice translation-rule 1 rule 1 /^9........./ //

Buy Now
Question # 12

In a Cisco UCM version 15 environment, a user reports that calls to external numbers with a specific prefix fail intermittently during peak hours. Which aspect should the administrator check to identify if the dial plan is misconfigured using the Real-Time Monitoring Tool?

Options:

A.

CTI port stales displayed in RTMT monitoring

B.

call trace logs showing the dialed number and matched route pattern

C.

registration status of al IP phones in RTMT

D.

CPU utilization on the Cisco UCM server during call attempts

Buy Now
Question # 13

Refer to the exhibit. An administrator has just completed the configuration of “cisco directory connector” and is preparing to enable automatic synchronization, but the results of the dry run sync revealed that three are 2 mismatch objects. What must the administrator do before enabling automic synchronization if they want the mismatched objects to be retained?

Options:

A.

Click on the " Mismatched Objects " tab within the Cisco Directory Connector application and click the " Fix mismatched objects " button.

B.

Log in to Webex Control Hub and manually add the 2 users that were flagged by Cisco Directory Connector as mismatched objects.

C.

Log in to Microsoft Active Directory and manually add the 2 users that were flagged by Cisco Directory Connector as mismatched objects.

D.

Nothing. It is not required for all objects to be matched before enabling automatic synchronization, and the mismatched objects will be retained by default.

Buy Now
Exam Code: 350-801
Exam Name: Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) v2.0
Last Update: Oct 27, 2026
Questions: 489
350-801 pdf

350-801 PDF

$23.75  $94.99
350-801 Engine

350-801 Testing Engine

$27.5  $109.99
350-801 PDF + Engine

350-801 PDF + Testing Engine

$36.25  $144.99