Authentic CompTIA Certification Exam CNX-001 Questions Answers

Comprehensive and Detailed Explanation From Exact Extract:

In the 2.4 GHz Wi-Fi band, channels overlap due to how the frequency spectrum is divided. To prevent co-channel and adjacent-channel interference, only non-overlapping channels should be used. According to the IEEE 802.11 standard and best practices outlined in the CompTIA CloudNetX CNX-001 Study Guide under “Wireless Network Optimization,” the three non-overlapping channels in the 2.4 GHz band are:

Channel 1 (2.412 GHz)

Channel 6 (2.437 GHz)

Channel 11 (2.462 GHz)

These channels are spaced far enough apart to avoid interference, even when operating in close proximity. Using overlapping channels (as in options A, B, and D) causes signal degradation and poor performance due to increased contention and retransmissions.

Relevant Extract from CompTIA CloudNetX CNX-001:

“Wi-Fi networks operating on the 2.4 GHz band should use channels 1, 6, and 11 to ensure maximum throughput and minimal interference in environments with multiple access points.”

================================================

Comprehensive and Detailed Explanation From Exact Extract:

Risk transference is a risk management strategy in which the financial impact of a risk is shifted to a third party, such as an insurance company. In this scenario, the purchase of an insurance policy to cover potential damage or loss from a natural disaster is an example of transferring risk, not avoiding, mitigating, or accepting it.

Relevant Extract from CompTIA CloudNetX CNX-001 Study Guide under “Risk Management Concepts”:

“Risk transference involves moving the responsibility or financial burden of a risk to a third party, often through the purchase of insurance or third-party service agreements.”

This approach is contrasted with mitigation (reducing risk), acceptance (living with the risk), or avoidance (eliminating the risk).

================================================

Comprehensive and Detailed Explanation From Exact Extract:

Using a spectrum analyzer to inspect the 6GHz frequency range allows the administrator to confirm the presence and source of interference. This step aligns with the “identify the problem” phase of the CompTIA troubleshooting methodology. Before making changes or documenting channels, the administrator must validate whether interference exists and collect diagnostic data.

Relevant Extract from CompTIA CloudNetX CNX-001 Study Guide — under “Troubleshooting Methodology and Wireless Interference”:

“Spectrum analyzers provide a visual representation of frequency usage and interference in wireless bands, allowing administrators to isolate the root cause of degraded performance before implementing corrective actions.”

Other options:

A. Testing performance (Step 5 in the methodology) comes after identifying and resolving the issue.

C. Documentation is performed during the final step of troubleshooting.

D. Changing channels without evidence may worsen interference if the problem is not confirmed.

================================================