Exactprep 350-501 Questions

The network does not support BIDIR-PIM

The network is partially upgraded to support BIDlR-PIM

No interface for carrying traffic for multicast groups has been configured

The router has not been configured to advertise itself

Router1(config)#int fa0/0 -

Router1(config-if)#mpls ldp autoconfig

Router2(config)#router ospf 1 -

Router2(config-router)#mpls ip

Router1(config)#int fa0/0 -

Router1(config-if)#mpls ip -

Router1(config-if)#mpls ldp discovery transport-address interface

Router2(config)#int fa0/0 -

Router2(config-if)#mpls ip -

Router2(config-if)#mpls ldp discovery transport-address interface

Route1(config)#int fa0/0 -

Router1(config-if)#mpls ldp autoconfig

Router1(config-if)#mpls ldp discovery interface

Router2(config)#router ospf 1 -

Router2(config-router)#mpls ldp autoconfig

Router2(config-if)#mpls ldp discovery interface

Router1(config)#int fa0/0 -

Router1(config-if)#mpls ip -

Router2(config)#router ospf 1 -

Router2(config-router)#mpls ldp autoconfig

If each area is running its own IGP. the ABR routers must redistribute the IGP routing table into BGP

To support seamless MPLS. TDP must be used as the label protocol

If each area is running its own IGP. BGP must provide an end-to-end MPLS LSP

To support seamless MPLS, the BGP route reflector feature must be disabled

PE-A(config-pmap-c)#set dscp ef

PE-A(config-pmap-c)#fair-queue

PE-A(config-pmap-c)#random-detect

PE-A(config -pmap-c)#priority