N10-009 Exam Dumps - CompTIA Network+ Questions and Answers

A Content Delivery Network (CDN) stores cached versions of content in edge locations to deliver data faster and more reliably to users based on geographical proximity.

From Andrew Ramdayal’s guide:

“CDNs distribute content to multiple, geographically dispersed servers. This enhances performance and reliability for end-users by reducing latency and load times.”

To verify ownership of a domain, providers commonly require adding a TXT record to DNS containing a specific validation token (a name/value pair). A TXT (text) record is designed to store arbitrary text data associated with a domain or hostname, which makes it ideal for domain verification workflows used by certificate authorities, email security (SPF/DKIM/DMARC-related entries), and third-party services that need proof of administrative control over DNS. This fits Network+ DNS objectives that cover common record types and their practical purposes in real deployments.

An A record maps a hostname to an IPv4 address and is used for name-to-address resolution, not ownership verification. A PTR record provides reverse DNS mapping (IP address to hostname) and is stored in reverse lookup zones, not typically used for validating web domain ownership. A CNAME record creates an alias from one hostname to another canonical hostname; while sometimes used in service integrations, the classic “record name + token value” ownership verification is most directly and universally satisfied by a TXT record. Therefore, TXT is the correct choice given the requirement and the provided record name and value.

A split-tunnel VPN allows a device to route some traffic through the VPN (typically corporate traffic) while sending other traffic (like general internet browsing) directly over the local internet connection. This reduces the load on the corporate network because not all traffic is routed through the VPN tunnel.

Site-to-site VPNs are for permanent links between locations.

Full-tunnel VPNs route all traffic through the VPN, increasing the bandwidth usage on the corporate network.

GRE (Generic Routing Encapsulation) is a tunneling protocol that doesn’t encrypt and doesn ' t reduce bandwidth usage by itself.

???? Reference:

CompTIA Network+ N10-009 Official Objectives: 3.3 – Given a scenario, configure and deploy common VPN technologies.

The customer can access local resources (a database server), which means local networking is working. However, the inability to reach the internet suggests an issue with the default gateway. If the default gateway is unreachable, packets will not be routed outside the local network.

Breakdown of Options:

A. Incorrect DNS – DNS issues would cause problems resolving domain names, but the user should still be able to access external resources via IP addresses.

B. Unreachable gateway – ✅ Correct answer. If the default gateway is incorrect or unreachable, the device cannot route traffic to the internet.

C. Failed root bridge – STP (Spanning Tree Protocol) failures cause switching issues, but the user can still access local devices, meaning STP is not the problem.

D. Poor upstream routing – Would affect the entire network, not just one user.

•AAAA records map domain names to IPv6 addresses, enabling proper resolution.

•PTR records (A) are for reverse DNS lookups.

•TXT records (B) store text-based information, not IP addresses.

•NS records (D) define authoritative name servers but don’t directly affect IPv6 resolution.

???? Reference: CompTIA Network+ N10-009 Official Documentation – DNS Configuration & IPv6.

When a switch is improperly connected to a network, it can cause widespread connectivity issues, especially if there’s a misconfiguration in VLAN settings. A Native VLAN mismatch occurs when two switches connected via a trunk link have different native VLANs configured for untagged traffic. This can cause traffic to be sent to the wrong VLAN or dropped, resulting in connectivity loss for users.

Scenario Analysis: The intern likely connected the switch without ensuring that the trunk port’s native VLAN matched the existing network configuration. This is a common issue in Cisco-based networks when trunk links are misconfigured.

Why not VTP update? VLAN Trunking Protocol (VTP) updates propagate VLAN configurations across switches. While a VTP misconfiguration could cause issues, it’s less likely to immediately disrupt connectivity for many users unless the VTP server deleted critical VLANs, which is not implied here.

Why not Port security issue? Port security restricts access based on MAC addresses, typically affecting individual ports, not causing widespread outages.

Why not LLDP misconfiguration? Link Layer Discovery Protocol (LLDP) is used for device discovery, and misconfiguration is unlikely to cause a broad loss of connectivity.

A transceiver is the correct answer because it is the Layer 1 (Physical Layer) component that physically terminates and converts fiber-optic signals on an SFP-capable switch. In CompTIA Network+ N10-009 objectives, transceivers—such as SFP, SFP+, QSFP, and QSFP+ modules—are explicitly identified as physical interface components that handle signal transmission and reception. These modules convert electrical signals from the switch into optical signals for fiber cabling (and vice versa), enabling communication over different media types and distances.

A modem is also a Layer 1 device, but its purpose is to modulate and demodulate signals for WAN technologies such as DSL or cable—it does not terminate fiber connections on switches. An Ethernet NIC provides network access for end devices like computers and servers and typically terminates copper Ethernet, not modular fiber interfaces on switches. A repeater regenerates and amplifies signals to extend cable distances but does not provide fiber termination or media conversion at a switch port.

According to Network+ standards, SFP transceivers are essential for flexible network design, allowing administrators to select appropriate fiber types (single-mode or multi-mode), wavelengths, and distances while remaining compliant with physical layer requirements.

The 802.11n standard supports MIMO (Multiple Input Multiple Output), which allows multiple antennas to increase data throughput and improve reliability. Additionally, it uses non-overlapping channels in the 5 GHz band (and optionally the 2.4 GHz band), making it a good choice for high-speed, interference-resistant wireless connections. (Reference: CompTIA Network+ Study Guide, Chapter on Wireless Technologies)

When traceroute shows asterisks (timeouts) instead of IP addresses or hostnames, it may indicate that intermediate routers are dropping ICMP packets. However, performing an nslookup will reveal the IP address associated with the domain name, confirming that DNS resolution is correct and helping identify the path to the target server. The document states:

“nslookup is used to query DNS servers to retrieve IP address information associated with a domain name, which helps confirm DNS resolution is working correctly even when traceroute results show timeouts.”

GSM (Global System for Mobile communications) is the international standard that uses SIM cards to authenticate and connect phones to the cellular network. GSM allows users to place and receive calls while traveling globally, provided they have a SIM card. CDMA, on the other hand, does not use SIM cards in the same way and is primarily used in the United States. (Reference: CompTIA Network+ Study Guide, Chapter on Network Fundamentals)

Comprehensive and Detailed Explanation (aligned to N10-009):

An ad hoc wireless network allows devices to connect directly to each other without an access point. This is suitable for small, temporary setups like two laptops and a printer.

A. Mesh requires multiple nodes forming a larger distributed network.

B. Infrastructure requires an AP, which is not available here.

D. Point-to-point is typically for long-distance wireless links between two fixed endpoints.

References (CompTIA Network+ N10-009):

Domain: Networking Concepts — Wireless network types: infrastructure, ad hoc, mesh.

The most likely issue is transposed TX/RX. Fiber connections require the transmit strand on one side to connect to the receive strand on the other side, and vice versa. If transmit is connected to transmit and receive is connected to receive, the physical termination may be correct, but the link will not come online because the devices cannot properly send and receive optical signals.

The CompTIA Network+ N10-009 objectives include fiber media, transceivers, connectors, cabling issues, and troubleshooting physical connectivity. A visual fault locator can confirm continuity and help identify breaks, bends, or termination problems, but it does not always prove that the transmit and receive strands are correctly crossed between endpoints.

An incorrect SFP could also cause a fiber link failure, but the question emphasizes that only one connection remains offline after most links came online and that the termination was verified. That makes a polarity issue, such as reversed transmit and receive strands, the strongest answer. Incompatible cable is less likely if similar connections are working. CRC errors usually indicate a link is active but experiencing frame errors, not completely offline. Therefore, transposed TX/RX is correct.

Dynamic routing is most beneficial in a growing/changing network because it can automatically learn, adapt, and update routes as the topology changes. In Network+ (N10-009) routing objectives, dynamic routing protocols exchange routing information between routers and recalculate paths when links go down, new networks are added, or metrics change. This reduces the operational burden and the risk of human error that increases as the environment scales. With dynamic routing, adding a new subnet or branch often requires far fewer manual updates because routers propagate new route information automatically, and convergence mechanisms help restore connectivity after failures.

Option A can be partly true in large environments, but the core “best reason” emphasized for dynamic routing is the automatic adaptation to topology changes. Option B is incorrect—dynamic routing may introduce additional security considerations (route filtering, authentication, neighbor control). Option C is not a defining advantage; monitoring visibility depends on tools/telemetry rather than routing type. Therefore, the strongest and most correct reason is automatic changes and updates in network topology.

===========