300-430 Exam Dumps - Cisco CCNP Enterprise Questions and Answers

The Voice VLAN feature on switches allows the network to distinguish between voice traffic and data traffic from wireless clients connected to IP phones. This is crucial for applying the appropriate QoS to ensure that voice traffic is prioritized over client data traffic. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

 In a Cisco WLAN deployment where it is required that all APs from branch1 remain operational even if the control plane CAPWAP tunnel is down, the operational mode that must be configured on the APs is standalone (option B). In standalone mode, the APs can continue to function and provide network access to clients even without a connection to the WLC, which is essential during a WAN failure to headquarters. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, with a focus on AP operational modes and their behavior during network disruptions.

The OfficeExtend Access Point (OEAP) split tunnel feature allows the separation of corporate and local traffic. By implementing a split tunnel, remote workers can maintain wireless connectivity to the corporate network while simultaneously accessing local network resources such as printers. This solution ensures that local traffic does not have to traverse the corporate network, which can cause connectivity issues like the ones reported by the users. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When upgrading a Cisco AireOS WLC from version 7.3 to 8.9, it’s crucial to configure ACLs that allow necessary traffic for Cisco Central Web Authentication (CWA). The correct ACLs to configure are:

B. Permit 0.0.0.0 0.0.0.0 UDP DNS any: This ACL allows DNS queries from any source to any destination, which is essential for resolving domain names during the upgrade process.

E. Permit 0.0.0.0 0.0.0.0 UDP any any: This ACL permits all UDP traffic from any source to any destination, ensuring that services relying on UDP can continue to function during the upgrade.

These ACLs ensure that critical services like DNS resolution are not interrupted during the upgrade process, which could otherwise lead to system instability or failure to access network resources. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 To resolve the issue of changing the Cisco Hyperlocation detection threshold, the engineer should shut down all radios on the controller, change the Cisco Hyperlocation detection range, and then enable the radios again. This process ensures that the new threshold settings are applied correctly across the network.

 In a Cisco WLAN deployment where it is required that all APs from branch1 remain operational even if the control plane CAPWAP tunnel is down, the operational mode that must be configured on the APs is standalone (option B). In standalone mode, the APs can continue to function and provide network access to clients even without a connection to the WLC, which is essential during a WAN failure to headquarters. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, with a focus on AP operational modes and their behavior during network disruptions.

For optimal voice over WLAN performance with a Cisco 8821 wireless phone, the Cisco recommended configuration is to set the switch port to access mode and trust the DSCP markings. This ensures that voice traffic is appropriately prioritized in the network, providing better quality of service for voice communications. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

In a historic building where adding APs is challenging, the best approach to implement intrusion protection with a focus on on-channel attacks is to use APs in monitor mode with the Wireless Intrusion Prevention System (WIPS) submode. This setup allows the APs to dedicate their time to scanning the environment for threats without serving clients, which is suitable given the adequate coverage and the need to monitor for attacks. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The Media Stream feature on a Cisco WLC allows for the prioritization of streaming media. To guarantee at least 2 Mbps stream per user, the ‘coarse’ Resource Reservation Control (RRC) template should be used, as it provides the necessary bandwidth allocation for each user’s media stream. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide