300-430 Exam Dumps - Cisco CCNP Enterprise Questions and Answers

When an IT department needs to locate a stolen laptop using its MAC address, enabling Location History for Clients on the Mobility Services Engine (MSE) is crucial as it allows for historical tracking of client devices’ locations. Furthermore, Client location tracking must also be enabled on the MSE; this feature actively tracks and updates the current position of all client devices in real-time. Both settings are necessary to provide a comprehensive view of where the laptop has been over time and its current location within the wireless network’s coverage area. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 LDAP (Lightweight Directory Access Protocol) is a protocol used for accessing and maintaining distributed directory information services over an IP network. In the context of Cisco ISE (Identity Services Engine), LDAP can be utilized as a directory service to authenticate and authorize users during local web authentication processes. LDAP supports a wide range of directory services, including Microsoft Active Directory, which is commonly used in enterprise environments.

 In FlexConnect deployments with local switching, dynamic VLAN assignments are facilitated by Cisco ISE through the use of specific RADIUS attributes. The Tunnel-Private-Group-ID attribute is essential for communicating the VLAN ID to the access point, which then applies it to the wireless client after successful authentication.

For RADIUS to restrict administrative control effectively, the engineer needs to define a Network Access Server (NAS) entry that corresponds to the WLC’s management IP address and the AP subnet. The correct entry would be the NAS IP of the virtual interface (typically used for RADIUS communications) and the specific network range of the AP subnet, which is 192.168.2.0 with a subnet mask of 255.255.255.0. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

When an MSE with wIPS service is installed, it is crucial for alarm information to reach the MSE from the controllers. The Network Mobility Services Protocol (NMSP) is the protocol that facilitates this communication. Ensuring that NMSP is allowed through any firewalls or network security devices is essential for the proper functioning of the wIPS service. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

The bronze QoS level is typically recommended for guest services in a wireless network environment. This level prioritizes basic internet access, which is suitable for guest services that do not require high bandwidth or low latency. It ensures that more critical services are not impacted by guest traffic, which is often less sensitive to performance fluctuations. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The FlexConnect AP Upgrade feature allows for a selective upgrade process within a FlexConnect group. By not setting any master APs, the WLC will automatically select one AP of each model with the lowest MAC address to receive the upgrade directly from the controller. This ensures that the upgrade is distributed efficiently across different AP models in the group without manual intervention.

References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

The default NMSP echo interval between Cisco MSE and a Wireless LAN Controller is 15 seconds. This interval determines how frequently the MSE sends echo messages to the WLC to maintain the NMSP connection and ensure that the link is active and operational. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

 The issue described indicates that the Angle of Arrival (AoA) data is not being transmitted between the Cisco Wireless LAN Controller (WLC) and the virtual CMX server. To resolve this, the network administrator must ensure that port 2003 is allowed for AoA packets to flow through between the CMX appliances, which is necessary for Hyperlocation data transmission. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide