300-430 Exam Dumps - Cisco CCNP Enterprise Questions and Answers

The primary change to the network when adding APs for location-based services, such as VolMLAN, would be the AP footprint. This refers to the physical coverage area of the access points. Increasing the AP footprint enhances the ability to perform location-based services by improving the accuracy of triangulation and location tracking of devices. This is because a denser AP footprint allows for more precise determination of a device’s location within the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, specifically the sections discussing location-based services and AP deployment strategies for optimal coverage and location tracking.

The feature that must be enabled to ignore non-802.11 interference is “Avoid Persistent Non-WiFi Interference.” This setting allows the Radio Resource Management (RRM) to not react to non-802.11 noise and interference, which can be crucial in environments where such interference is common but does not significantly impact wireless performance. By enabling this feature, RRM will not change the channel in response to non-IEEE 802.11 interferers, thus maintaining a stable channel plan. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

 The exhibit provided appears to be a floor map overlay with Cisco CleanAir Zone of Impact for interferers, which shows different areas affected by interference on a wireless network. The area labeled ‘A’ indicates the greatest impact on the wireless network due to its larger size compared with other zones, suggesting more significant interference or a stronger source of interference within this zone. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

The correct command to configure the controller to update Cisco CMX every 5 seconds for rogue devices is “config nmsp notification interval rssi rogues 5”. NMSP (Network Mobility Services Protocol) is used by Cisco wireless controllers to manage and communicate with connected services such as Cisco CMX. The command structure “config nmsp notification interval” followed by the specific type of device or metric, in this case, ‘rssi rogues’, and the desired interval time ‘5’ seconds, sets the frequency of NMSP notifications for RSSI updates related to rogue devices.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

In Cisco ISE version 2.1 for BYOD with a Single SSID setup, 802.1x must be configured to provide the necessary layer of security and to facilitate the device registration process. 802.1x authentication allows for the use of EAP (Extensible Authentication Protocol) to authenticate users before they can access the network. This ensures that only authorized devices can join the BYOD network, providing a secure method for device onboarding and access control. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

For the MSE to communicate with the Cisco Wireless LAN Controller (WLC) over NMSP when installed on a different network, the necessary configuration is to allow TCP/16113 port on the firewall. NMSP uses TCP port 16113 for its communications, and opening this port on the firewall will enable the MSE and WLC to establish a connection and communicate effectively. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

CMX Facebook Wi-Fi is designed to provide limited access to the network before a user completes authentication. This feature allows HTTP traffic only before authentication while blocking all other traffic, which corresponds with option A. Additionally, it intercepts HTTP traffic to redirect the user to the authentication page, which aligns with option D. The purpose of these restrictions is to ensure that users can be directed to log in via Facebook for Wi-Fi access without compromising network security by allowing unchecked access. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

The Platinum QoS marking is typically used for the highest-priority traffic, such as voice and video. Given the requirement for a high average bitrate for the video application, Platinum would be the appropriate QoS marking to ensure the necessary bandwidth and priority on the WLAN. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

The issue described indicates a problem with the 802.1X authentication policy on the authenticator, which is typically the wireless controller or access point. Even though the CA certificate is correctly installed on the laptop, if the authenticator’s policy is incorrectly configured or does not match the required settings for the corporate network, the user’s authentication attempts will fail. It is essential to review and correct the 802.1X policy settings on the authenticator to resolve this issue. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide