300-430 Exam Dumps - Cisco CCNP Enterprise Questions and Answers

 For a large company requiring support for 32 VLANs for different departments, the most efficient solution is to configure one single SSID and use Cisco ISE for dynamic VLAN assignment based on user roles. Cisco ISE can classify users into different groups and assign them to the appropriate VLANs. This approach reduces the complexity of managing multiple SSIDs and simplifies the user experience while maintaining a high level of security and network segmentation. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When configuring an Access Control List (ACL) to restrict traffic to the Wireless LAN Controller (WLC) CPU, the direction of the traffic is crucial. Since the ACL is meant to control traffic that is destined for the WLC CPU, it should be set as “Inbound”. This means that any rules applied within this ACL will affect incoming traffic towards the WLC, which is necessary when aiming to restrict certain types of traffic from reaching and potentially overwhelming the controller’s processing capabilities. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 To provide guests access using social media authentication, the engineer must configure the “Social Connect” service. This service allows guests to use their Facebook credentials, among other social media platforms, to authenticate and gain network access. It simplifies the guest access process by leveraging existing social media accounts for authentication. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

 Configuring an AVC profile for the Jabber traffic and applying it to the WLAN ensures that voice traffic from Cisco Jabber receives Platinum QoS while keeping other WLAN traffic at Silver class. AVC allows for deep packet inspection which can identify Jabber application packets so they can be given priority over other types of traffic.

If the Cisco 5520 Series Wireless LAN Controller is no longer manageable via the network after implementing a CPU ACL, permit statements must be added to the top of the ACL in both directions (A). These statements should specify the network from which management is allowed and the virtual interface of the controller to ensure proper management access. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When FlexConnect APs are in standalone mode due to losing connection to the WLC, they should still be able to serve clients if local switching and authentication are enabled. The issue described occurs because FlexConnect Local Authentication is disabled. With local auth enabled, the AP can authenticate clients directly, without needing to communicate with the WLC, thus allowing the SSID to remain advertised and clients to stay connected even if the WLC is unreachable. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Fastlane is a feature developed by Apple and Cisco that provides a higher-quality user experience for critical business applications. To implement Fastlane, the WLAN must use the Platinum QoS profile, which is designed to prioritize business-critical traffic and applications. Since the IT department has updated the iPads to a specific version, it is important to ensure that the QoS settings align with the requirements of Fastlane to maintain application performance and security.

References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

To establish connectivity between a Wireless LAN Controller (WLC) and Cisco’s Connected Mobile Experiences (CMX) through Network Mobility Services Protocol (NMSP), it is essential to enable NMSP on the WLC, which facilitates communication with location-based services like CMX. Additionally, for secure communication, it is necessary to add the MAC address of the Cisco CMX server to the WLC along with its SSC (Self-Signed Certificate) key, ensuring that both devices can authenticate each other and establish a trusted connection. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide