Free Access CompTIA SK0-005 New Release

The administrator should rebuild the volume to restore it after replacing the failed hard drive. A volume is a logical unit of storage that can span across multiple physical disks. A volume can be configured with different levels of RAID (Redundant Array of Independent Disks) to provide fault tolerance and performance enhancement. When a hard drive in a RAID volume fails, the data on that drive can be reconstructed from the remaining drives using parity or mirroring techniques. However, this process requires a new hard drive to replace the failed one and a rebuild operation to copy the data from the existing drives to the new one. Rebuilding a volume can take a long time depending on the size and speed of the drives and the RAID level.

TFTP (Trivial File Transfer Protocol) is a simple and lightweight protocol that can be used to transfer files over a network. TFTP is often used to upgrade firmware or software on network devices, such as routers, switches, or servers. TFTP can also be used to install a Type 1 hypervisor, such as VMware ESXi, on multiple hosts simultaneously12.

References = 1: How to Install VMware ESXi Type 1 Hypervisor - MatthewEaton.net(https://mattheweaton.net/posts/how-to-install-vmware-esxi-type-1-hypervisor/) 2: Explore Type 1 Hypervisors - Set Up Virtual Machines Using VirtualBox and vSphere - OpenClassrooms(https://openclassrooms.com/en/courses/7163136-set-up-virtual-machines-using-virtualbox-and-vsphere/7358546-explore-type-1-hypervisors)

Memory and CPU are two metrics that can be used for monitoring system utilization. Memory refers to the amount of RAM that is available and used by the system and its processes. CPU refers to the percentage of processor time that is consumed by the system and its processes. Both memory and CPU can affect the performance and responsiveness of the system and its applications. Monitoring memory and CPU can help identify bottlenecks, resource contention, memory leaks, high load, etc.

Drives, fans, and power supplies are server components that can most commonly be replaced without downtime if they are hot-swappable. Hot-swappable components can be removed and inserted while the server is running, without affecting its operation or performance. Drives store data and applications, fans cool down the server components, and power supplies provide electricity to the server. Replacing these components can prevent data loss, overheating, or power failure. References: CompTIA Server+ Certification Exam Objectives, Domain 2.0: Hardware, Objective 2.2: Given a scenario, install, configure and maintain server components.