300-620 Cisco Exam Lab Questions

Page: 2 / 6

Question 8

Which type of profile needs to be created to deploy an access port policy group?

Options:

attachable entity

Pod

module

leaf interface

Question 9

In a Cisco ACI Multi-Site fabric, the Inter-Site BUM Traffic Allow option is enabled in a specific stretched bridge domain. What is used to forward BUM traffic to all endpoints in the same broadcast domain?

Options:

ingress replication on the spines in the source site

egress replication on the destination leaf switches

egress replication on the source leaf switches

ingress replication on the spines in the destination site

Question 10

How is broadcast forwarded in Cisco ACI Multi-Pod after ARP flooding is enabled?

Options:

Ingress replication is used on the spines to forward broadcast frames in the IPN infrastructure.

Within a pod, the ingress leaf switch floods the broadcast frame on all fabric ports.

Broadcast frames are forwarded inside the pod and across the IPN using the multicast address that is associated to the bridge domain.

For the specific bridge domain, all spines forward the broadcast frames to IPN routers.

Question 11

An ACI engineer is implementing a Layer 3 out inside the Cisco ACI fabric that must meet these requirements:

The data center core switch must be connected to one of the leaf switches with a single 1G link.
The routes must be exchanged using a link-state routing protocol that supports hierarchical network design.
The data center core switch interface must be using 802.1Q tagging, and each vlan will be configured with a dedicated IP address.

Which set of steps accomplishes these goals?

Options:

Set up the ElGRP Protocol policy with the selected Autonomous System number. Set up the Routed External Network object ana Node Profile, selecting ElGRP Create the Switch profile, selecting Port-channel and the appropriate interfaces Create the default network and associate it with the Routed Outside object.

Set up the BGP Protocol policy with the Autonomous System number of 0.

Configure an interface policy and an External Bridged Domain.

Create an External Bridged Network using the configured VLAN pool.

Build the Leaf profile, selecting Routed sub-interface and the appropriate VLAN.

Configure the OSPF Protocol policy with an area of 0.

Create Routed Outside object and Node Profile, selecting OSPF as the routing protocol. Build the Interface profile, selecting Routed Sub-interface and the appropriate VLAN. Configure the External Network object with a network of 0.0.0.0/0.

Set up the ElGRP Protocol policy with the selected Autonomous System number. Create the Routed Outside object and Node Profile selecting ElGRP Configure the Interface profile selecting Routed Interface and the appropriate interfaces. Create the External Network object with a network of 0.0.0.0/0.

Page: 2 / 6

300-620 Cisco Exam Lab Questions, 300-620 Exam Results, Sure Pass Exam 300-620 PDF, Download Full Version 300-620 Cisco Exam, 300-620 VCE Exam Download,

Exam Code: 300-620

Exam Name: Implementing Cisco Application Centric Infrastructure (DCACI)

Last Update: May 2, 2024

Questions: 192