Changed 4A0-C02 Exam Questions

The primary VRF on PE1 contains routes learned from spoke sites.

All traffic between spoke sites must pass through CE1.

The secondary VRF on PE1 is used to route data packets from the hub CE to the spoke sites.

PE1 advertises the primary VRF routes to CE1.

ASBRs exchange labeled IPv4 routes for the system addresses of PE routers.

It requires a route reflector to be configured in each AS for successful operation.

VPN-IPv4 routes are neither maintained nor distributed by the ASBRs.

PE routers in different ASes exchange VPN-IPv4 routes directly between each other using MP-eBGP.

The system address of PE2 is present. The system addresses of CSC-PE1 and CSC-PE2 are not present.

The system addresses of PE2, CSC-PE1 and CSC-PE2 are all present.

The system address of CSC-CE1, the route 192.168.10.1, and the route 192.168.20.1 are all present.

The system address of PE2 and the route 192.168.20.1 are present.

One VPRN, one route distinguisher, and two route targets

Two VPRNs, one route distinguisher, and three route targets

Two VPRNs, two route distinguishers, and three route targets

One VPRN, two route distinguishers, and three route targets