Last Attempt H12-322 Questions

Page: 9 / 10

Question 36

What is the correct description of the WLAN site survey for different typical scenarios?

Options:

The office surveys the main load-bearing columns and partitions to cover the impact. If it is an overall suspended ceiling, the AP should be considered as close to the maintenance port, if it is metal

Ceiling, you can choose to place the AP under the ceiling or wall mount

If the wall of the school classroom is made of reinforced concrete, the signal attenuation is large. It is best to measure the attenuation when surveying. The teaching building should pay attention to the weak electricity room.

Set

The ward inspection scene has high requirements for coverage field strength, roaming effect, and bandwidth requirements. At the same time, it is necessary to pay attention to the interference or disallow of medical equipment.

Area with Wi-Fi signal

The stadium has a complicated environment and difficult wiring. Therefore, the weak house and the wiring should be confirmed with the property. If the distance is too far, it may be considered.

Adding an external switch, the survey should focus on mutual interference and installation methods between APs.

Question 37

How many mw can 17dBm be converted into?

Options:

100

Question 38

The fixed length feeder used by AP9330DN has 5m/10m/15m/20m specifications. If it exceeds 20m, it needs to be cut according to the actual situation.

The right length.

Options:

True

False

Question 39

In the ACU2 solution of an independent AC board of a WLAN campus network project, the switch where the board is located and the ACU2 board are logically two independent networks.

Yuan, that is, an independent management device.