PDF PAM-SEN Study Guide

Edit DBParm.ini to add: AllowNonStandardFWAddresses=[10.1.1.1,10.2.2.2],Yes,123:outbound/udp. Most Voted

Edit DBParm.ini to add: NTPServer=[10.1.1.1:123/UDP,10.2.2.2:123/UDP].

Edit DBParm.ini to add: AllowNonStandardFWAddresses=[10.1.1.1,10.2.2.2],Yes,123:outbound/udp,123:inbound/udp.

Edit the Windows Firewall configuration to add a rule for Port 123/udp outbound to 10.1.1.1 and 10.2.2.2.

The Interval setting for the platform is incorrect and must be less than 120.

The ImmediateInterval setting for the platform is incorrect and must be greater than or equal to 1.

The DaysToRun setting for the platform is incorrect and must be set to Sat,Sun.

The HeadStartInterval setting for the platform is incorrect and must be set to 0.

TRUE

FALSE

In the CYBRWINDAD platform, under Automatic Password Management/General, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEA_ADMIN). Most Voted

In the settings for Configuration/CPM assigned to the WINDEMEA and WINDEMEAADMIN safes, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEAADMIN).

In the CYBRWINDAD platform, under UI&Workflows/Properties/Optional, configure AllowedSafes and set to (WINDEMEA)|(WINDEMEA_ADMIN).

Modify cpm.ini on the relevant CPM/s and add the setting AllowedSafesCYBRWINDAD and set to (WINDEMEA)|(WINDEMEAADMIN).