LEED-Green-Associate Exam Dumps - USGBC Leadership in Energy and Environmental Design (LEED) Questions and Answers

Installing dual-flush toilets can significantly reduce indoor water demand. Dual-flush toilets have two flush options: a half flush for liquid waste and a full flush for solid waste. By using less water for liquid waste, these toilets can reduce overall water consumption by up to 30%, helping to achieve the owner’s water reduction goal. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED Building Design and Construction: Homes is the rating system that applies to single-family homes, low-rise multi-family homes, and mid-rise multi-family homes1. It includes the ability to reduce point thresholds for LEED certification levels based on building size, as smaller homes tend to have lower environmental impacts than larger homes2. The point thresholds are determined by the size of the house compared to the number of bedrooms1.

 2 LEED v4: Building Design + Construction Guide, Homes, p. 171 The LEED rating system - Ecohome.

Paved surfaces absorb and retain heat, increasing local temperatures and contributing to the heat island effect. LEED encourages mitigating this effect by using materials with high Solar Reflectance Index (SRI) or implementing strategies like green roofs and shaded areas​​.

The percentage rule is a method to determine the most appropriate LEED rating system for a project when several rating systems may be applicable1. To use this rule, first assign a rating systemto each square foot or square meter of the building, and then choose the most appropriate rating system based on the resulting percentages1. The entire gross floor area of a LEED project must be certified under a single rating system and is subject to all prerequisites andattempted credits in that rating system1. The percentage rule states that if one rating system covers more than 60% of the gross floor area, that rating system should be used1. If no rating system covers more than 60% of the gross floor area, but one covers more than 40%, then that rating system should be used1. If no rating system covers more than 40% of the gross floor area, then the project team can choose any applicable rating system1. Therefore, the answer is B. 40/60 rule.

=

LEED rating system selection guidance

A neighborhood that includes a diversity of uses is most appropriate to encourage a walkable street design. A diversity of uses means that different types of activities and functions are located within walking distance of each other, such as residential, commercial, retail, educational, recreational, cultural, and civic uses. A diversity of uses creates a vibrant and lively neighborhood that attracts pedestrians and supports social interaction. A walkable street design also incorporates elements such as sidewalks, crosswalks, street trees, lighting, benches, bike lanes, public transit stops, and reduced vehicle speeds to enhance pedestrian safety and comfort. The other options are not appropriate to encourage a walkable street design. An area with a decreased building-height-to-street-width ratio creates a wide and open street that exposes pedestrians to more sun and wind, reducing their comfort level. A development that uses many culs-de-sac in the street design creates a disconnected and irregular street network that limits pedestrian access and mobility. A project in an area designed with streets to facilitate increased speed limits prioritizes vehicle movement over pedestrian safety and comfort. References: LEED Green Associate Candidate Handbook, page 29; USGBC [Location & Transportation], page 2-3.

Air movement is a factor that affects the thermal comfort of occupants, as it influences the heat exchange between the human body and the surrounding air1. Air movement can be controlled by mechanical systems, such as fans, or natural systems, such as operable windows2. LEED v4 requires that at least 50% of individual occupant spaces have thermal comfort controls that allow occupants to adjust air movement in their local environment3.

 1 LEED (BD+C)- Indoor Environmental Quality Credit: Thermal comfort2 Get to Know LEED®: How to Provide Thermal Comfort in a LEED for Homes … 3 CI-v4.1 EQc5: Thermal comfort | LEEDuser.

According to the U.S. Energy Information Administration, space heating accounted for about 32% of energy use for all U.S. commercial buildings in 2018, followed by ventilation and lighting, each at about 10%1. Space heating is the largest single energy end use in U.S. office buildings as well2.

Use of energy in commercial buildings - U.S. Energy Information Administration (EIA)1

DataTrends: Energy Use in Office Buildings | ENERGY STAR2

The LEED for Schools rating system includes specific requirements not found in other BD+C categories:

“Minimum Acoustical Performance – Schools ONLY – EQp3 + EQc9… This prerequisite is for school projects only to provide a quiet environment to facilitate the teacher-to-student and student-to-student communication.”

This makes "Minimum Acoustic Performance" a required prerequisite for schools.

Graywater refers to relatively clean wastewater from domestic activities such as washing dishes, laundry, and bathing. Water from lavatory faucets falls into this category. Graywater can be treated and reused for non-potable purposes such as toilet flushing or irrigation, which can help conserve water. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The Energy Policy Act of 1992 (EPAct of 1992) is a United States government act that set goals, createdmandates, and amended utility laws to increase clean energy use and improve overall energy efficiency in the United States1. The EPAct of 1992 is a baseline standard for the Energyand Atmosphere prerequisite category in LEED v4, which aims to reduce the environmental and economic impacts of excessive energy use and promote the use of renewable and alternative energy sources2. The EPAct of 1992 establishes the minimum energy performancerequirements for buildings, such as lighting power density, HVAC efficiency, and water heating efficiency3. The EPAct of 1992 also provides tax incentives and grants for energy conservationand renewable energy projects1. The EPAct of 1992 was amended by the Energy Policy Act of 2005, which updated some of the provisions and standards of the original act4.