220-1201 Exam Dumps - CompTIA A+ Questions and Answers

CompTIA A+ teaches that S.M.A.R.T. warnings indicate imminent drive failure. Even if the RAID controller reports the array as “healthy,” a S.M.A.R.T. alert means the drive should be replaced immediately.

RAID 5 provides redundancy for one drive failure, but technicians should replace the degrading drive before it fails fully, ensuring the rebuild happens proactively.

Running chkdsk affects file systems, not drive health. Disabling write caching is unrelated. Rebuilding the array should only occur after replacing the faulty drive.

Replacing the drive prevents a catastrophic dual-drive failure scenario, which RAID 5 cannot survive.

This approach aligns with CompTIA troubleshooting guidelines for RAID maintenance and S.M.A.R.T. diagnostics.

Secure badging—often used with “pull printing” or “secure print release”—requires users to authenticate at the printer before documents are printed. CompTIA A+ highlights this feature as critical for protecting sensitive data in corporate environments. With badge-based printing, jobs stay in a secure print queue until the authorized user physically scans their badge.

This prevents confidential documents, like HR termination notices, from sitting unattended in the output tray. It also reduces print waste and ensures accountability for printed materials.

Duplex printing (B) simply prints double-sided pages. Printer sharing (C) allows multiple users to use a printer but does not provide security. Wireless encryption (D) protects network traffic but does not address abandoned print jobs.

Therefore, badging / secure print release is the correct protective measure.

A common reason for aPOST failureafter a motherboard installation isimproperly seated RAM. The system requires working memory to successfully complete POST. Reseating (removing and reinserting) the RAM ensures it's making proper contact with the motherboard.

Option A:Flashing the BIOS is not possible if the system won’t POST.

Option B:A dead CMOS battery can cause BIOS settings to reset, but it usually won’t prevent POST entirely.

Option D:Reinstalling the old motherboard is premature basic troubleshooting steps should be completed first.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.5: Given a scenario, troubleshoot problems related to motherboards, RAM, CPU, and power.

Since the issue only occurs during scanning and copying (not printing or faxing), the problem is isolated to the document feeder. A vertical line is typically caused by debris or damage on theglass under the ADF (Automatic Document Feeder), not on components related to printing.

The first security step after deploying a new router is to change the default administrative password. Default credentials are well known and pose a security risk if left unchanged.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.3 – Secure a wireless network:

“Always change default administrative credentials before further configuration to prevent unauthorized access.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Wireless Security

CompTIA Exam Objectives 220-1101, Domain 2.3

============

Upgrading to asolid-state drive (SSD)providesmore storage spaceandfaster read/write speeds, which resolves both the “insufficient storage” error and slow application loads.

Option B (USB):Not intended for permanent application storage or performance improvements.

Option C (HDD):Could solve storage capacity but would not improve speed.

Option D (RAM):Affects multitasking and memory-intensive tasks, not storage capacity directly.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.5: Given a scenario, troubleshoot problems related to storage devices.

CompTIA A+ explains that DMARC (Domain-based Message Authentication, Reporting, and Conformance) relies on TXT DNS records to define its policies. TXT records allow administrators to publish arbitrary text-based configuration data, including DKIM and SPF policies, which DMARC references.

MX records identify mail servers, A records map IP addresses, and CNAME records create aliases none are used to store DMARC policy rules.

DMARC improves email authenticity by requiring SPF and DKIM alignment and specifying how receiving servers should handle failed validations. The A+ exam explicitly mentions TXT records as the method used for SPF, DKIM, and DMARC storage.

Therefore, the correct answer is the TXT record, which stores the policy used by DMARC to authenticate senders and prevent spoofing.

Comprehensive and Detailed Explanation From Exact Extract:

MDM (Mobile Device Management) enforces security policies, such as encryption, remote wipe, and access control. It could have remotely wiped the device or locked it down to prevent data theft.

If the user is on a guest network and cannot access internal resources like printers, connecting to the corporate Wi-Fi will place the device on the correct subnet to access the printer.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Network segmentation:

“Guest networks are isolated from internal resources for security. Connect to the main corporate Wi-Fi to access shared devices.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Wireless Networking

CompTIA Exam Objectives 220-1101, Domain 2.2

============

If two devices have thesame static IP address, anIP conflictoccurs. This results in both devices being intermittently disconnected or unable to communicate on the network. It’s a common mistake when copying configurations manually.

Option B:DNS conflicts wouldn’t cause total disconnection and wouldn't occur just from copying IP settings.

Option C:A cable issue would only affect one workstation.

Option D:Switchport security issues wouldn't affect both machines simultaneously unless port security was configured very specifically.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 2.6: Given a scenario, configure and troubleshoot network connectivity.