220-1201 Exam Dumps - CompTIA A+ Questions and Answers

PCIe (Peripheral Component Interconnect Express) is required for high-end video cards.

NVMe (Non-Volatile Memory Express) utilizes the M.2 or PCIe interface for the fastest SSD performance.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Motherboard expansion slots and storage interfaces:

“High-end video cards require a PCIe slot, while NVMe drives use M.2 (PCIe) slots for the highest data transfer rates.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Motherboard & Storage

CompTIA Exam Objectives 220-1101, Domain 3.2

============

correct answer is "Overclocking" and "Reduce CPU Clock speed" CPU is at 4.5 Ghz when normal is 3.2 Ghz. Overclocking too much can cause freezes, and this is a gaming computer sothe user probably took it too far. http://blog.logicalincrements.com/2018/12/4-troubleshooting-tips-overclocking-pc/

Looking at the network configurations and outputs from both PCs and servers, here are the possible issues and solutions:

1. PC 1

Issue: The IP address for PC1 is 192.168.1.1, which conflicts with Server 1 (which also uses 192.168.1.1).

Solution: Change the IP address on PC1 to a unique one within the range, like 192.168.1.3.

2. PC 2

Issue: PC 2 is configured with 192.168.1.2, which conflicts with Server 2 that has the same IP address.

Solution: Update the IP address on PC 2 to something unique, like 192.168.1.4.

3. Server 1

Issue: The IP address for Server 1 is 192.168.1.1, which conflicts with PC1.

Solution: Since Server 1 and PC1 are using the same IP address, change one of them. For Server 1, you could change the IP address to 192.168.1.5.

4. Server 2

Issue: Server 2 is using the IP address 192.168.1.2, which conflicts with PC2.

Solution: Update Server 2 to use a different IP address, such as 192.168.1.6.

General Remediation:

The primary problem here is overlapping IP addresses, leading to connectivity issues. Each device on the network must have a unique IP address. After making these changes, ensure that all devices can communicate properly by testing the connection between devices and verifying they can access shared resources.

When a technician encounters a burning smell, it is a critical safety issue. The first response must be to immediately power down and disconnect the device from all power sources to prevent electric shock, fire, or further hardware damage.

✅ From the CompTIA A+ 220-1101 Official Study Guide, Objective 4.1 – Troubleshoot common hardware problems:

"Signs of electrical issues such as burning smells, smoke, or sparks require an immediate shutdown of the system and disconnection from any power source."

After ensuring safety, the technician should inspect the hardware for visible signs of damage:

✅ From the same Objective (4.1):

"Inspect for foreign objects, liquid damage, or burnt components. These can cause short circuits or thermal events that may damage the motherboard or other internal components."

These steps are standard practice in the industry to ensure safe and accurate diagnosis of faulty devices. Trying a different adapter (Option F) may make the problem worse, and contacting vendors (Option D) comes after initial safety and inspection.

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 4: Troubleshooting Hardware Problems

CompTIA Exam Objectives 220-1101, Domain 4.0 – Hardware and Network Troubleshooting

Firewalls are specifically designed to monitor, filter, and control network traffic using Access Control Lists (ACLs). ACLs define which traffic is allowed or denied based on parameters like IP address, protocol, or port.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.2 – Networking hardware and security:

“Firewalls use access control lists (ACLs) to allow or deny traffic based on rules. Unmanaged switches and PoE injectors do not support ACLs.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Security Devices

CompTIA Exam Objectives 220-1101, Domain 2.2

============

NTP (Network Time Protocol) is specifically designed to synchronize the clocks of networked computers and devices automatically.

From CompTIA A+ 220-1101 Official Study Guide, Objective 2.6 – Network services and protocols:

“NTP is used to automatically synchronize system clocks on network devices, ensuring all systems have accurate time.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Networking Protocols

CompTIA Exam Objectives 220-1101, Domain 2.6

============

Badging refers to the use of NFC-enabled ID badges or cards that authenticate users when tapped against a reader for secure print or access control.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – Secure printing and authentication:

“NFC authentication is commonly implemented using employee badges, allowing secure and convenient access to devices and functions.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Secure Print Solutions

CompTIA Exam Objectives 220-1101, Domain 3.4

============

A hypervisor is software or firmware that allows multiple operating systems (virtual machines) to run on a single physical host. It manages the allocation of resources and isolation of each VM.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.7 – Virtualization concepts:

“A hypervisor is the key component of virtualization, enabling a physical server to host multiple virtual machines (VMs), each with its own OS and resources.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Virtualization

CompTIA Exam Objectives 220-1101, Domain 3.7

============

If newly installed RAM is not fully recognized, the most likely cause is incorrect installation or incompatible slots. Reseating or reinstalling the RAM modules in the correct slots can quickly resolve the issue without extra cost.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.2 – Install and configure PC components:

"If memory is not detected, check installation and reseat modules. Ensure they are placed in the correct, matched slots for dual-channel operation."

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Memory Installation

CompTIA Exam Objectives 220-1101, Domain 3.2

============

Assigning a static IP to network printers ensures the printer's address does not change after outages or DHCP lease expirations, preventing connectivity issues.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.4 – Printer network configuration:

“Printers should use static IPs to ensure they remain reachable and do not change addresses after network events.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Printer Networking

CompTIA Exam Objectives 220-1101, Domain 3.4