Refer to the exhibit. An engineer configures a Cisco C-Series UCS server. The company policy states that all C-Series servers must be configured so that Cisco IMC is reachable only from the management port of the server. Which NIC configuration must the engineer apply to meet this objective?
Which command must be run before downgrading a Cisco Nexus 9300 Series Switch?
Refer to the exhibit. An engineer implements a VXLAN pod deployment with the vPC. During an upgrade of switches in POD1. Leaf 102 starts to rejoin the vPC pair. Also, traffic to and from the Web Cluster becomes intermittent for five minutes. Which additional command must be applied on both switches to resolve this issue?
Refer to the exhibit. Users report SAN traffic packet loss on a blade server that is managed by using Cisco UCS Manager. An engineer must implement a SPAN feature to an external Fibre Channel analyzer. Which configuration source in the TEST monitoring session must the engineer select?
Which set of actions must be taken to backup service profiles, MAC pools, and VLANs and transfer the back up file to the external server using authentication?
Refer to me exhibit An engineer is troubleshooting a connectivity issue for a VM with MAC address 00:50:56:88:10:14 running on me cisco UCS-8 Series blade in VLAN 10. Cisco DCS Manager is connected to a Cisco nexus 9000 Series switch over port channel 10. Currently, the VM Is unreachable from any source that Is outside of me Cisco UCS domain. Which action musí be takenlo allow me VM to be readable?
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
• vNIC and vHBA profiles
• Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
Which configuration must be used to boot a Cisco UCS C-Series Server using iSCSI?
What is the DHCP snooping bindings file shown here used for by the Cisco Nexus 9000 Series Switch?
A storage engineer must configure Cisco TrustSec Fibre Channel by using manual ESP mode on a Cisco MDS 9000 Series Switch. ESP mode must use the default message authentication and encryption method. Which configuration must the engineer apply on the switch to complete the configuration?
TESTED 01 Nov 2025
