An engineer must implement a Python script to manage Cisco Application Centric Infrastructure (ACI) and endpoint groups. Which Python libraries must be used to parse responses and send requests to Cisco ACI?

Refer to the exhibit An engineer must resolve a connectivity issue on a Cisco 9000 Senes Switch that was configured by using Ansible The switch must be configured to meet these requirements •Interface G*gabitethemet0/1 must be a member of VLAN 10 in access mode •Interface G*gabetethernet0/2 must allow VLANs 10 and 20 in trunk mode, with native VLAN 20
Which set of actions must be taken to meet these criteria?
An engineer must configure HSRP protocol on two cisco nexus 9000 series switches running a virtual port channel in addition, the HSRP implementation must meet these requirements:

Drag and drop the commands from the the right to complete a configuration of the HSRP on the left. The commands are used more than once. Not all commands are used


Refer to the exhibit An engineer analyzes a Wireshark packet flow between a PC and a DHCP server What occurs in the packet flow?
Which feature of Cisco Nexus Dashboard permits users to switch between site controllers of Cisco ACI?
An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics. Which configuration set accomplishes this task?

An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the mgmt0 interface Which set of commands accomplishes this task?
What happens when the install all epid bootflash:m9000-pkg2-9.2.2.epid module all fan-module all bar all command is run on the Cisco MDS 9000 Series Director Switch?
A network engineer needs to configure system logging on the Cisco MDS Series Switch. The messages must be displayed with the severity level of "warning" and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity. Which configuration must be applied to meet these requirements?
A)

B)

C)

D)
