N10-009 Exam Dumps - CompTIA Network+ Questions and Answers

Using a /30 subnet mask is the most efficient way to conserve IP space for a point-to-point connection between two routers. A /30 subnet provides four IP addresses, two of which can be assigned to the router interfaces, one for the network address, and one for the broadcast address. This makes it ideal for point-to-point links where only two usable IP addresses are needed.References: CompTIA Network+ study materials and subnetting principles.

A subinterface is a logical interface created on a single physical router interface that allows routing between VLANs (known as Router-on-a-Stick (ROAS)). This method is commonly used when only one physical router is available, allowing inter-VLAN communication without additional hardware.

•Why not the other options?

•VXLAN (B) – This is used for extending Layer 2 networks over a Layer 3 infrastructure, primarily in data centers. It does not directly enable inter-VLAN communication.

•Layer 3 switch (C) – A Layer 3 switch can route between VLANs, but the scenario states that purchasing additional hardware is not an option.

•VIR (D) – This is not a standard networking term in the context of VLAN communication.

The first step of troubleshooting is always to identify the problem, which includes verifying the symptoms (incorrect time), asking the user clarifying questions, and checking system logs. Only after confirming the problem can the administrator proceed to form a theory and plan.

A. Plan of action is later.

B. Implement solution comes after testing a theory.

D. Test the theory requires a defined problem first.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — Troubleshooting methodology (Identify → Theory → Test → Plan → Implement → Verify → Document).

Packet Capture: This method captures and inspects network traffic to identify unauthorized downloads or malicious behavior. It provides detailed insight into the data being transmitted, making it the best tool for this scenario.

Anomaly alerts (A): Alerts may indicate unusual activity but do not provide detailed traffic analysis.

Port mirroring (B): Port mirroring can redirect traffic for analysis but requires a packet capture tool for deeper inspection.

Performance monitoring (C): Focuses on system performance metrics, not detailed traffic content.

•A. Isolate smart devices to their own network segment: Network segmentation using VLANs or separate SSIDs ensures that smart devices (like speakers) are not on the same network as guests, preventing unauthorized control.

•E. Change the default credentials: Many IoT devices (e.g., smart speakers) come with default usernames and passwords. If these are not changed, unauthorized users can easily take control.

•Why not the other options?

•B. Configure IPS: IPS (Intrusion Prevention System) detects threats but cannot block specific guest actions on an IoT device.

•C. Install a new AP: A new access point does not solve the unauthorized control issue.

•D. Set up a syslog server: Helps with logging, but does not prevent unauthorized access.

•F. Configure GRE: Generic Routing Encapsulation (GRE) is used for VPN tunneling, which is irrelevant in this case.

Fax machines use analog phone lines, which are connected using RJ11 connectors. These are standard telephone connectors with 4 or 6 positions and are used for POTS (Plain Old Telephone Service) lines.

F-type is used for coaxial cables (e.g., TV and cable modems).

RJ45 is used for Ethernet network connections.

SC (Subscriber Connector) is used for fiber optic connections, not analog telephone lines.

???? Reference:

CompTIA Network+ N10-009 Official Objectives: 2.4 – Compare and contrast common network connectors.

===========