Pass NS0-520 Exam Guide

Page: 2 / 8

Question 8

You need to gather information from the host systems that will be attached to the NetApp storage system using either FC or iSCSI. This information includes operating system version, patch levels, open bus slots, and cards in bus slots. What other information must you gather from the host systems?

Options:

bus type (PCIe and/or PCI-x) and video adapters

memory in system and Ethernet ports (both used and free)

bus type (PCIe and/or PCI-x)and Ethernet ports (both used and free)

bus type (PCIe and/or PCI-x) and Serial ports (both used and free)

Question 9

Which topology allows for guaranteed maximum network performance for iSCSI?

Options:

isolated VLAN network

MetroWAN network

direct connect

WAN network

Question 10

When booting your NetApp storage system for the first time the system fails to boot.

What should you do first to address this problem?

Options:

You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.

You re-download the boot image to the compact flash card, then reboot the system.

You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.

Question 11

You have inherited a small FC SN infrastructure that consists of 15 servers (hosts), two Cisco MDS 9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your predecessor did not configure zoning according to best practices.

In this scenario, what information is necessary to audit your SAN zoning? (Choose two.)