Selected 156-315.81 CCSE Questions Answers

 Check Point Central Deployment Tool (CDT) communicates with the Security Gateway / Cluster Members over Check Point SIC using TCP port 18191 by default. CDT is a tool that allows you to perform simultaneous configuration changes on multiple gateways or clusters using predefined commands or scripts. References: Check Point Central Deployment Tool (CDT)

 The inspection point Big l is the first point immediately following the tables and rule base check of a packet coming from outside of the network. It is also the last point before the packet leaves the Security Gateway to the internal network1. The other inspection points are either before or after the rule base check, or in a different direction of traffic flow2. References: Check Point R81 Security Gateway Architecture and Packet Flow, 156-315.81 Checkpoint Exam Info and Free Practice Test - ExamTopics

The command cphaprob igmp can be used to display the Multicast MAC address of a cluster. This command shows the IGMP (Internet Group Management Protocol) information for each cluster interface, including the VRID (Virtual Router ID), the Multicast IP address, and the Multicast MAC address3. The other commands do not show the Multicast MAC address information. References: Check Point R81 ClusterXL Administration Guide

References: