SAA-C03 Exam Dumps - Amazon Web Services AWS Certified Associate Questions and Answers

Understanding the Requirement: The application needs to write to multiple block storage volumes in multiple EC2 Nitro-based instances simultaneously to achieve higher availability.

Analysis of Options:

General Purpose SSD (gp3) with Multi-Attach: Supports Multi-Attach but does not provide the highest performance required for critical applications.

Throughput Optimized HDD (st1) with Multi-Attach: Not suitable for applications requiring high performance and low latency.

Provisioned IOPS SSD (io2) with Multi-Attach: Provides high performance and durability, suitable for applications requiring simultaneous writes and high availability.

General Purpose SSD (gp2) with Multi-Attach: Similar to gp3 but with less flexibility and performance.

Best Solution:

Provisioned IOPS SSD (io2) with Multi-Attach: This solution ensures the highest performance and availability for the application by allowing multiple EC2 instances to attach to and write to the same EBS volume simultaneously.

Amazon EC2 Auto Scaling offers the ability to add lifecycle hooks to your Auto Scaling groups. These hooks let you create solutions that are aware of events in the Auto Scaling instance lifecycle, and then perform a custom action on instances when the corresponding lifecycle event occurs. (https://docs.aws.amazon.com/autoscaling/ec2/userguide/lifecycle-hooks.html)

A Network Load Balancer is a type of load balancer that operates at the connection level (Layer 4) and can load balance both TCP and UDP traffic1. A Network Load Balancer is suitable for scenarios where high performance and low latency are required, such as real-time multiplayer games1. A Network Load Balancer can also handle sudden and volatile traffic patterns while using a single static IP address per Availability Zone1.

To meet the requirements of the scenario, the solutions architect should use a Network Load Balancer for traffic distribution between the EC2 instances in the Auto Scaling group. The Network Load Balancer can route UDPtraffic from the client to the servers onthe appropriate port2. TheNetwork Load Balancer can also support TLS offloading for secure communications between the client and servers1.

Amazon DynamoDB is a fully managed NoSQL database service that can store and retrieve any amount of data with consistent performance and low latency3. Amazon DynamoDB on-demand is a flexible billing option that requires no capacity planning and charges only for the read and write requests that are performed on the tables3. Amazon DynamoDB on-demand is ideal forscenarios where the application traffic is unpredictable or sporadic, such as gaming applications3.

To meet the requirements of the scenario, the solutions architect should use Amazon DynamoDB on-demand for data storage. Amazon DynamoDB on-demand can store gamer scores and other non-relational data without intervention from the developers. Amazon DynamoDB on-demand can also scale automatically to handle any level of requesttraffic without affecting performance or availability3.

Option A is the most appropriate solution for reducing replication lag without significant changes to the application code and minimizing ongoing operational overhead. Migrating the database to Amazon Aurora MySQL allows for improved replication performance and higher scalability compared to Amazon RDS for MySQL. Aurora Replicas provide faster replication, reducing the replication lag, and Aurora Auto Scaling ensures that there are enough Aurora Replicas to handle the incoming traffic. Additionally, Aurora MySQL native functions can replace the stored procedures, reducing the load on the database and improving performance.

Enabling Amazon Elastic Block Store (Amazon EBS) fast snapshot restore on a snapshot allows you to quickly create a new Amazon Machine Image (AMI) from a snapshot, which can help reduce the initialization latency when provisioning new instances. Once the AMI is provisioned, you can replace the AMI in the Auto Scaling group with the new AMI. This will ensure that new instances are launched from the updated AMI and are able to meet the increased demand quickly.

The allowed block size is between a /28 netmask and /16 netmask. The CIDR block must not overlap with any existing CIDR block that's associated with the VPC.https://docs.aws.amazon.com/vpc/latest/userguide/configure-your-vpc.html

Restricting inbound access to the web servers to only port 443, which is used for HTTPS traffic, and allowing access from any IP address (0.0.0.0/0), since the application is public and accessible for global customers.

Restricting inbound access to the DB instance to only port 3306, which is used for MySQL traffic, and allowing access only from the security group of the web servers, which creates a secure connection between the two tiers and prevents unauthorized access to the database.

Restricting outbound access to the minimum required for both tiers, which is not specified in the question but can be assumed to be similar to the inbound rules.

The S3 Block Public Access feature allows you to restrict public access to S3 buckets and objects within the account. You can enable this feature at the account level to prevent any S3 bucket from being made public, regardless of the bucket policy settings. AWS Organizations can be used to apply a Service Control Policy (SCP) to the account to prevent IAM users from changing this setting, ensuring that all S3 objects remain private. This is a straightforward and effective solution that requires minimal operational overhead.

This answer is correct because it provides a resilient and durable replacement for the on-premises file share that is compatible with Windows IIS web servers. Amazon FSx for Windows File Server is a fully managed service that provides shared file storage built on Windows Server. It supports the SMB protocol and integrates with Microsoft ActiveDirectory, which enables seamless access and authentication for Windows-based applications. Amazon FSx for Windows File Server also offers the following benefits:

Resilience: Amazon FSx for Windows File Server can be deployed in multiple Availability Zones, which provides high availability and failover protection. It also supports automatic backups and restores, as well as self-healing features that detect and correct issues.

Durability: Amazon FSx for Windows File Server replicates data within and across Availability Zones, and stores data on highly durable storage devices. It also supports encryption at rest and in transit, as well as file access auditing and data deduplication.

Performance: Amazon FSx for Windows File Server delivers consistent sub-millisecond latencies and high throughput for file operations. It also supports SSD storage, native Windows features such as Distributed File System (DFS) Namespaces and Replication, and user-driven performance scaling.

By configuring the Amazon FSx file share to use an AWS KMS CMK to encrypt the images in the file share, the company can protect the images from unauthorized access and comply with company policy. By using NTFS permission sets on the images, the company can prevent accidental deletion of the images by restricting who can modify or delete them.

https://aws.amazon.com/blogs/security/how-to-prevent-uploads-of-unencrypted-objects-to-amazon-s3/#:~:text=Solution%20overview,console%2C%20CLI%2C%20or%20SDK. &text=To%20encrypt%20an%20object%20at,S3%2C%20or%20SSE%2DKMS.

Configure an EC2 Auto Scaling scheduled scaling policy based on the monthly schedule is the best option because it allows for the proactive scaling of the EC2 instances before the monthly batch run begins. This will ensure that the application is able to handle the increased workload without experiencing downtime. The scheduled scaling policy can be configured to increase the number of instances in the Auto Scaling group a few hours before the batch run and then decrease the number of instances after the batch run is complete. This will ensure that the resources are available when needed and not wasted when not needed. The most appropriate solution to handle the increased workload during the monthly batch run and avoid downtime would be to configure an EC2 Auto Scaling scheduled scaling policy based on the monthly schedule.

https://docs.aws.amazon.com/autoscaling/ec2/userguide/ec2-auto-scaling-scheduled-scaling.html

This approach will allow the EC2 instance to access the internet and download the monthly security updates while still being located in a private subnet. By creating a NAT gateway and placing it in a public subnet, it will allow the instances in the private subnet to access the internet through the NAT gateway. And then, configure the private subnet route table to use the NAT gateway as the default route. This will ensure that all outbound traffic is directed through the NAT gateway, allowing the EC2 instance to access the internet while still maintaining the security of the private subnet.

A. Create an Amazon API Gateway REST API. Configure the method to use the Lambda function. Enable IAM authentication on the API. This option is the most operationally efficient as it allows you to use API Gateway to handle the HTTPS endpoint and also allows you to useIAM to authenticate the calls to the microservice. API Gateway also provides manyadditional features such as caching, throttling, and monitoring, which can be useful for a microservice.

To improve the architecture of this application, the best solution would be to use Amazon Simple Queue Service (Amazon SQS) to buffer the requests and decouple the S3 bucket from the Lambda function. This will ensure that the documents are not lost and can be processed at a later time if the Lambda function is not available. This will ensure that the documents are not lost and can be processed at a later time if the Lambda function is not available. By using Amazon SQS, the architecture is decoupled and the Lambda function can process the documents in a scalable and fault-tolerant manner

The best option to improve the security of the data in transit is to configure a TLS listener and deploy the server certificate on the NLB. This will ensure that the data is encrypted and secure as it travels through the network. Additionally, you could also configure AWS Shield Advanced and enable AWS WAF on the NLB to further protect the network from malicious attacks. Alternatively, you could also change the load balancer to an Application Load Balancer (ALB) and enable AWS WAF on the ALB. Finally, you could also encrypt the Amazon Elastic Block Store (Amazon EBS) volume on the EC2 instances by using AWS Key Management Service (AWS KMS).

You must specify an SSL certificate for a TLS listener. The load balancer uses the certificate to terminate the connection and decrypt requests from clients before routing them to targets.https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-listener.html

This option is the most efficient because it uses aMulti-AZ deployment for the DB instance, which provides enhanced availability and durability for RDS database instances by automatically replicating the data to a standby instance in a different AvailabilityZone1. It also provides a recovery point objective (RPO) of less than 1 second for all its production databases, as the standby instance is kept in sync with the primary instanceusing synchronous physical replication2. This solution meets the requirement of requiring a RPO of less than 1 second for all its production databases. Option B is less efficientbecause it uses auto scaling for the DB instance in one Availability Zone, which is a way to automatically adjust the compute capacity of your DB instance based on load or a schedule3. However, this does not provide a RPO of lessthan 1 second for all its production databases, as it does not replicate the data to another Availability Zone. Option C is less efficient because it uses read replicas in a separate Availability Zone, which are read-only copies of your primary database that can serve read traffic and support scaling. However, this does not provide a RPO of less than 1 second for all its production databases, as read replicas use asynchronous replication and can lag behind the primary database. Option D is less efficient because it uses AWS Database Migration Service (AWS DMS) change data capture (CDC) tasks, which are tasks that capture changes made to source data and apply them to target data. However, this does not provide a RPO of less than 1 second for all its production databases, as AWS DMS uses asynchronous replication and can lag behind the source database.

RDS supported Storage > https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Storage.html GP2 max IOPS >https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/general-purpose.html#gp2-performance

Amazon RDS provides three storage types: General Purpose SSD (also known as gp2 and gp3), Provisioned IOPS SSD (also known as io1), and magnetic (also known as standard).They differ in performance characteristics and price, which means that you can tailor your storage performance and cost to the needs of your database workload. You can create MySQL,MariaDB, Oracle, and PostgreSQL RDS DB instances with up to 64 tebibytes (TiB) of storage. You can create SQL Server RDS DB instances with up to 16 TiB of storage. For this amount of storage, use the Provisioned IOPS SSD and General Purpose SSD storage types.https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Storage.html

S3 Intelligent-Tiering is a cost-optimized storage class that automatically moves data to the most cost-effective access tier based on changing access patterns. Although it offers cost savings, it also introduces additional latency and retrieval time into the data retrieval process, which may not meet the requirement of "immediately available" data. On the other hand, S3 Standard-Infrequent Access (S3 Standard-IA) provides low cost storage with low latency and high throughput performance. It is designed for infrequently accessed data that can be recreated if lost, and can be retrieved in a timely manner if required. It is a cost-effective solution that meets the requirement of immediately available data and remains accessible for up to 3 months.

https://docs.aws.amazon.com/waf/latest/developerguide/web-acl.html

A rate-based rule in AWS WAF allows the security team to configure thresholds that trigger rate-based rules, which enable AWS WAF to track the rate of requests for a specified time period and then block them automatically when the threshold is exceeded. This provides the ability to prevent HTTP flood attacks with minimal operational overhead.

Key phrase in the Question is must scale read and write capacity. Aurora is only for Read. Amazon DynamoDB has two read/write capacity modes for processing reads and writes on your tables: On-demand Provisioned (default, free-tier eligible)https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.ReadWriteCapacityMode.html